Varian Medical Systems Truebeam
Varian Medical Systems · Model Truebeam
Yesterday's boundaries are today's starting points. Break the boundaries of today's treatment technologies with a system designed from the ground up to optimize both radiotherapy and radiosurgery. A system that gives oncologists and multidisciplinary teams the power to manage challenging cancers with unparalleled ease and precision anywhere in the body, including the lung, abdomen, breast, head and neck. A radically new solution that is faster, is more powerful and that seamlessly integrates respiratory gating, imaging and treatment techniques. Developed on a sophisticated, synchronized architecture, the system allows users now to navigate the complexities of cancer care with confidence. The TrueBeam system is innovative, intelligent and intuitive.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
RF / magnetron (or klystron) output instability
HighSymptoms: Beam-on faults, dose-rate low or unstable, RF/HV or arc interlocks.
Root cause: Magnetron/klystron or thyratron at end of life, HV supply, or waveguide arcing / SF6 pressure loss.
MLC leaf fault
HighSymptoms: Leaf stuck or out of position, delivery interlock, QA fluence errors.
Root cause: MLC leaf motor, leaf-guide wear, or a leaf position-readout fault.
Gantry / collimator / couch drive fault
MediumSymptoms: Rotation, field-size or couch position error, position interlock.
Root cause: Drive motor, encoder, or brake.
Onboard imaging fault (kV / MV / CBCT)
MediumSymptoms: kV source or flat-panel imaging degraded, poor image for setup, imaging-arm deploy errors.
Root cause: kV X-ray tube, amorphous-silicon panel, or the imaging-arm drive.
Dosimetry / ion-chamber drift
HighSymptoms: Output constancy checks trend out, symmetry/flatness off, chamber interlock.
Root cause: Monitor ion-chamber aging or a dose-servo fault.
Water / thermal management fault
MediumSymptoms: Over-temperature interlocks, dose-rate instability, coolant-flow alarm.
Root cause: Chiller pump, heat-exchanger fouling, or low coolant.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Magnetron / klystron
OEM service; dosimetry re-commissioning required.
Class Periodic replacementRel. cost $$$$R&R Expert-level
Thyratron
Class Periodic replacementRel. cost $$$$R&R Expert-level
MLC leaf motor / drive assembly
Class Major service partRel. cost $$$$R&R Expert-level
kV X-ray tube / a-Si imaging panel
Class Major service partRel. cost $$$$R&R Expert-level
Monitor ion chamber
Class Major service partRel. cost $$$$R&R Expert-level
Chiller pump / heat exchanger
Class Major service partRel. cost $$$R&R Difficult
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Magnetron / klystron OEM service; dosimetry re-commissioning required. | Periodic replacement | $$$$ | Expert-level |
| Thyratron | Periodic replacement | $$$$ | Expert-level |
| MLC leaf motor / drive assembly | Major service part | $$$$ | Expert-level |
| kV X-ray tube / a-Si imaging panel | Major service part | $$$$ | Expert-level |
| Monitor ion chamber | Major service part | $$$$ | Expert-level |
| Chiller pump / heat exchanger | Major service part | $$$ | Difficult |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Beam-on / RF fault
- This is an OEM-service linac - the BMET role is triage and coordination.
- Record the exact fault codes from the console and the modulator / equipment-room logs.
- Check chiller status and coolant flow first - thermal faults mimic RF faults.
- Verify SF6 / waveguide pressure.
- Escalate a confirmed magnetron / thyratron / waveguide fault to Varian; keep the unit down until physics re-verifies output.
Symptom: MLC or field-size interlock
- Note the leaf / diaphragm and the exact interlock.
- Review the daily QA and delivery-log trend.
- Run the MLC calibration / diagnostic where the procedures allow.
- Escalate a confirmed leaf-drive or readout fault to Varian.
- Coordinate with physics before resuming clinical use.
Documents & Manuals
Safety & Recalls
Synced live from the FDA openFDA API.
- RECALL
Reports have been received of an anomaly that can result in a treatment without intended gating (respiratory tracking/monitoring). This issue occurs when a patient planned with gating is treated on more than one system.
- RECALL
Medical device for patient treatment does not meet electrical safety standards.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio