Philips Xper Flex Cardio Physiomonitoring System
Philips Healthcare · Model Xper Flex Cardio Physiomonitoring System
Space-saving design delivers placement and positioning flexibility Streamlined FFR workflow makes it easy to access FFR measurements, from acquisition to automatic data entry onto reports DXL Algorithm provides 16-lead ECG analysis, Culprit Artery Detection and patented ST Maps.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Haemodynamic pressure channel will not zero / reads wrong
HighSymptoms: IBP trace offset, "zero required" persists, pressures implausible.
Root cause: Transducer not open to atmosphere during zero, a damaged pressure cable, or an amplifier / acquisition fault.
ECG / intracardiac signal noise
MediumSymptoms: Surface or IC electrograms noisy, missing channels.
Root cause: Patient cable / junction box, catheter connections, or amplifier noise / grounding.
Flex module / wireless link fault
MediumSymptoms: The Flex acquisition module drops out or will not connect to the review system.
Root cause: Module battery, the wireless / docked link, or a module fault.
Workstation / recording-system integration fault
MediumSymptoms: No waveform to the lab displays or the recording system, review workstation hangs.
Root cause: Video / network output or workstation fault.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Pressure cable set
Class Periodic replacementRel. cost $$R&R Easy
Patient cable / junction box
Class Periodic replacementRel. cost $$$R&R Easy
Flex acquisition module / battery
Class Periodic replacementRel. cost $$$R&R Fairly easy
Workstation PC
Class Major service partRel. cost $$$R&R Moderate
Video / network output hardware
Class Major service partRel. cost $$R&R Moderate
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Pressure cable set | Periodic replacement | $$ | Easy |
| Patient cable / junction box | Periodic replacement | $$$ | Easy |
| Flex acquisition module / battery | Periodic replacement | $$$ | Fairly easy |
| Workstation PC | Major service part | $$$ | Moderate |
| Video / network output hardware | Major service part | $$ | Moderate |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Pressure will not zero / reads wrong
- Open the transducer to atmosphere at the phlebostatic axis and re-zero.
- Flush the line and clear any air or clot.
- Swap in a known-good pressure cable.
- Move the channel to a spare input to isolate cable vs amplifier.
- Replace the cable or refer the Flex module.
Symptom: Flex module drops out
- Check the module battery and the dock / wireless link.
- Reseat the module in its dock.
- Confirm the review workstation sees the module.
- Swap in a known-good module if available.
- Escalate a persistent link fault to Philips.
Technical Specs
- Weight
- 4.4 lbs
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio