Sorin Group Brat 2
Sorin Group · Model Brat 2
A high quality, fast performing ATS Salvaging the patient’s own blood has become a critical part of patient care, helping to save lives as well as offset the high cost of providing allogeneic blood. The BRAT 2® Autologous Transfusion System processes blood faster than other systems, providing high hematocrit and excellent wash quality. With its patented Baylor Bowl, the BRAT 2 system can quickly process high volumes of blood without spilling red blood cells into the waste bag. Additionally, custom programming options allow the user unparalleled flexibility in processing.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Roller / centrifugal pump fault
HighSymptoms: A pump will not run at set flow, speed unstable, occlusion out of adjustment, flow-probe error.
Root cause: Worn roller-pump raceway / rollers, a centrifugal drive-motor / coupling fault, or a flow-probe fault.
Console / control-module fault
HighSymptoms: A pump module unresponsive, display errors, module not recognised by the console.
Root cause: Module electronics or the console-to-module link.
Battery / UPS fault
HighSymptoms: Short back-up run time, will not transfer cleanly on a power interruption.
Root cause: Aged battery / UPS pack.
Pressure / level / bubble-monitoring fault
MediumSymptoms: Pressure, reservoir-level or bubble-detector alarms implausible or not triggering.
Root cause: Transducer, level-sensor, or bubble-detector fault.
Heater-cooler / temperature fault
MediumSymptoms: Blood / cardioplegia temperature not tracking, heater-cooler alarm, flow fault.
Root cause: Heater-cooler pump / refrigeration or a temperature-probe fault.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Roller-pump raceway / roller kit
Class Periodic replacementRel. cost $$$R&R Difficult
Centrifugal drive motor / coupling
Class Major service partRel. cost $$$R&R Difficult
Battery / UPS pack
Class Periodic replacementRel. cost $$$R&R Moderate
Pressure / level / bubble sensors
Class Periodic replacementRel. cost $$R&R Moderate
Flow probe
Class Periodic replacementRel. cost $$R&R Fairly easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Roller-pump raceway / roller kit | Periodic replacement | $$$ | Difficult |
| Centrifugal drive motor / coupling | Major service part | $$$ | Difficult |
| Battery / UPS pack | Periodic replacement | $$$ | Moderate |
| Pressure / level / bubble sensors | Periodic replacement | $$ | Moderate |
| Flow probe | Periodic replacement | $$ | Fairly easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: A pump will not run correctly
- Move the function to a spare pump module / mast position to isolate module vs console.
- Check the roller occlusion setting and inspect the raceway / rollers (roller pumps).
- Check the centrifugal drive coupling and flow probe.
- Verify flow against an independent flow probe.
- Replace the roller kit or drive components as isolated; a CPB console must pass a full functional check before clinical use.
Symptom: Monitoring alarm implausible or not triggering
- Verify each pressure channel against a reference.
- Test the level and bubble detectors per the service procedure.
- Reseat the sensor connectors.
- Calibrate the pressure channels.
- Replace a sensor that fails its functional test - these are safety systems.