Physio-Control LifePak Express
Physio-Control · Model LifePak Express
Clear, calm voice guides user one step at a time Flashing shock button Highly visible readiness indicator Infant/Child Electrode capability Lightweight, compact and durable Simplified maintenance Compatible with EMS and hospital technology Download and store information with LIFENET® DT Express or CODE-STAT™ software.
Key tips
- ·Never skip the daily/shift ready-check - a defibrillator found dead during a code is a real, repeated root-cause finding.
- ·Pads and batteries have real expiration dates - check them on every PM, not just at annual service.
- ·Verify energy-delivery accuracy with a real defibrillator analyzer, not just a self-test pass.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Will not power on / no scenarios
MediumSymptoms: Trainer / AED dead, or the training scenarios will not run.
Root cause: Depleted batteries, or a control-electronics fault.
Training pads / connector fault (trainer) or expired pads (LifePak Express)
MediumSymptoms: Pads not detected, no shock prompt, or (Express) pads / battery expired.
Root cause: Worn training-pad connector or leads; or expired single-use pads / battery on the live AED.
Voice-prompt / speaker fault
MediumSymptoms: No or garbled voice prompts.
Root cause: Speaker or audio fault.
Remote / scenario-control fault (trainer)
LowSymptoms: The trainer does not respond to the instructor remote.
Root cause: Remote batteries, pairing, or the IR / RF link.
Self-test / readiness fault (LifePak Express)
HighSymptoms: The readiness indicator shows service / the unit chirps.
Root cause: Battery / pads expired, or an internal fault flagged by the periodic self-test.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Batteries
Class Frequent wear itemRel. cost $R&R Easy
Training pads / leads (trainer) or electrode pads (Express)
Class Periodic replacementRel. cost $$R&R Easy
Instructor remote (trainer)
Class Periodic replacementRel. cost $$R&R Easy
Speaker / audio board
Class Major service partRel. cost $R&R Moderate
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Batteries | Frequent wear item | $ | Easy |
| Training pads / leads (trainer) or electrode pads (Express) | Periodic replacement | $$ | Easy |
| Instructor remote (trainer) | Periodic replacement | $$ | Easy |
| Speaker / audio board | Major service part | $ | Moderate |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Daily/shift visual and self-test check (AAMI EQ56 daily-ready standard)
- ·Battery and pad expiration-date tracking
- ·Energy-delivery accuracy test against a defibrillator analyzer
- ·Paddle/cable continuity check
- ·Annual full PM
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Will not power on / no scenarios
- Fit fresh batteries.
- For a live LifePak Express, run a manual self-test and check the readiness indicator.
- Confirm the pads are connected and, on the live AED, in date.
- Test the instructor remote (trainer).
- Return a live AED to service and refer to the manufacturer if the self-test fails.
Symptom: Pads / voice-prompt fault
- Inspect the training-pad leads / connector (trainer) or replace expired pads (Express).
- Confirm the pads seat and are detected.
- Check the speaker / volume.
- Replace the training pad leads or the AED pads as needed.
- Re-run a scenario / self-test.
Technical Specs
- Height
- 4.2 in
- Length
- 9.5 in
- Weight
- 4.5 lbs
- Defibrillator Type
- External, Automated (AED)
- Width
- 8 in
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Crash carts (every unit)
- Emergency Department
- ICU
- OR
- Code-blue response areas
Documents & Manuals
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio