NAI Tech Products DiCOM Box CA
NAI Tech Products · Model DiCOM Box CA
Modality Worklist Modality Performed Procedure Step (MPPS) Storage Commitment Multi-Modality compatible with over 250 models Host video rates up to 20MHz pixel rate High line rate configurations available Interlaced or non-interlaced video input.
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
No or distorted capture from the modality
HighSymptoms: Black or corrupt captured image / video, no signal, dropped frames.
Root cause: Input cable / format mismatch (DVI / VGA / SDI / composite), a capture-card fault, or the source not outputting.
DICOM send / PACS fault
MediumSymptoms: Studies will not send to PACS, C-STORE fails, worklist empty.
Root cause: Network configuration change, an AE-title / IP / port mismatch, or a NIC fault.
Storage drive full or failing
MediumSymptoms: Cannot capture, slow operation, drive errors.
Root cause: Local drive near capacity or degrading.
USB / print output fault
LowSymptoms: USB media not detected, DICOM / paper print fails.
Root cause: USB port, driver, or spooler.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Video capture card
Class Major service partRel. cost $$$R&R Moderate
Storage drive / SSD
Class Periodic replacementRel. cost $$R&R Moderate
Network interface card
Class Major service partRel. cost $R&R Moderate
Input video cables
Class Periodic replacementRel. cost $R&R Easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Video capture card | Major service part | $$$ | Moderate |
| Storage drive / SSD | Periodic replacement | $$ | Moderate |
| Network interface card | Major service part | $ | Moderate |
| Input video cables | Periodic replacement | $ | Easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: No or corrupt capture
- Confirm the modality is outputting the expected format / resolution.
- Reseat and, if possible, substitute the input cable.
- Try a known-good source.
- Check the capture status indicators.
- Replace the capture card if input is confirmed good.
Symptom: Cannot send to PACS
- Ping the PACS server and confirm the local IP / gateway.
- Verify the AE title, IP and port for both ends.
- Send a DICOM echo (C-ECHO).
- Check for a recent network or PACS-side change.
- Review the DICOM configuration and NIC if association fails.
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio