
MedTron · Model Accutron Injector CT
Compact injector controlled by microprocessor (stand with rollers) Swivelling injection unit contains the control electronics and the driving mechanics Aluminium housing. Heatable syringe holder with Easy Loading Syringe (ELS) 200 ml Touch-screen control panel with different languages Tactile keys for manual piston movement, starting and stopping the injection Wireless touch-screen remote control (corresponds to the control panel of the injector) Display of injection parameter or pressure graph during injection Graphical display of the injection parameters Non-stick syringe holder Secured injection position at an angle of about 15° below horizontal (built-in security sensor), tilt through 90° to vent the system.
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Symptoms: Injector will not advance the plunger, stalls, pressure-limit or motor-fault alarm.
Root cause: Drive-motor / lead-screw wear, a syringe-interface / plunger-ram fault, or a pressure-transducer fault.
Symptoms: Air-detector alarms with no air, or fails to detect air, will not arm.
Root cause: Air-detector sensor or a dirty / damaged sensor window.
Symptoms: The console loses the injector head, hand-controller unresponsive, arm / pause not working.
Root cause: Head-to-console cable / wireless link or a board fault.
Symptoms: Contrast not warmed, warmer alarm.
Root cause: Syringe / bath heater or its sensor.
Symptoms: Short run time, will not hold charge.
Root cause: Aged battery pack.
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Drive motor / lead-screw assembly | Major service part | $$$ | Difficult |
| Plunger ram / syringe-interface assembly | Major service part | $$ | Moderate |
| Pressure transducer | Major service part | $$ | Moderate |
| Air-detector sensor | Major service part | $$ | Moderate |
| Battery pack (mobile heads) | Periodic replacement | $$ | Fairly easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
No documents available for this device yet.
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio