GE HealthCare CARESCAPE V100
GE HealthCare · Model CARESCAPE V100
Accuracy The CARESCAPE V100 provides precise, accurate readings using proven DINAMAP technology. The GE DINAMAP SuperSTAT blood pressure algorithms support speed, comfort and artifact rejection for virtually all types of patients, including neonates with very low perfusion pressures, geriatrics and hyper/hypo tensive patients. When combined with the Mobile Vitals Plus application, vital signs are transmitted to the EMR in real time, eliminating any transcription errors. Speed With non-invasive blood pressure determination times as fast as 14 seconds, and the clinical accuracy of embedded DINAMAP technology, the CARESCAPE V100 monitor delivers exceptional speed and accuracy. The Exergen TemporalScanner thermometer provides non-invasive, fast, easy and accurate temperatures. And when combined with the Mobile Vitals Plus application, vital signs are transmitted to the EMR in real time, eliminating any lag time. Efficiency The CARESCAPE V100 monitor is a two-in-one monitor - it can be used for both spot check and continuous monitoring, with continuous monitoring freeing up valuable nursing time. When combined with the Mobile Vitals Plus application, nurses spend less time in documentation and more time with their patients and families. Infection Prevention GE supports your infection prevention efforts. They offer the Exergen TemporalScanner thermometer, which does not come into contact with mucous membranes. In addition, the silver ion anti-microbial head has been found to reduce the population of Staph, Listeria and E-Coli. The monitor’s durable plastic coating is compatible with most stringent chemical hospital cleansers, and GE CRITIKON blood pressure cuffs are disposable. Mobility Not only can it withstand the rigors of tough clinical use and cleaning, the CARESCAPE* V100 monitor’s battery has a long run time – typically eight to 11 hours before requiring recharge. And if the battery is discharged, it maintains the data, and users can plug it in and continue to use the monitor. This extended battery life allows users to flexibly move the monitor from one patient room to the next for the course of a shift. Consistent across all care areas The CARESCAPE* V100 includes the same advanced parameters and algorithms as other higher acuity GE monitors, so users can consistently measure across all care areas – from the ED to OR to ICU to PACU to Surgical. This gives users confidence that when a patient’s measurements deviate, the change is due to the patient’s condition - not a difference between monitors. With speed, accuracy and connectivity, the CARESCAPE V100 monitor, along with the Mobile Vitals Plus solution1, helps users manage Clinical Information Logistics by collecting the right information at the point of care, and presenting it wherever it is needed. So users can make fast, quality care decisions informed by relevant, current clinical intelligence.
Key tips
- ·A no-signal/flatline alarm gets checked on the patient first, not the monitor - rule out a real clinical event before troubleshooting.
- ·Recalibrate NIBP against a reference manometer, not just a self-test pass.
- ·Reused patient cables (SpO2, ECG leads) are a common source of intermittent-fault complaints - swap the cable before the module.
Typical Failure Modes
Failure patterns typical of this equipment class - general BMET reference, not verified against this exact unit's own service history unless flagged. Severity is a category-level estimate.
ECG lead-off / artifact
MediumSymptoms: Flat or noisy ECG, frequent lead-off alarms.
Root cause: Worn electrodes, loose leads, or dry gel.
SpO2 probe / sensor failure
MediumSymptoms: No pleth, SpO2 drops to --- or false low.
Root cause: LED/photodiode aging or cable damage.
NIBP measurement error
MediumSymptoms: Cuff fails to inflate, erroneous BP, long cycle.
Root cause: Pump/valve wear or cuff leak.
Internal battery depletion
HighSymptoms: Short backup time, battery alarm on transport.
Root cause: Aged backup battery.
Serviceable Parts & Consumables
The parts a BMET typically services on this class of equipment. Service class and relative cost are general engineering estimates for the category, not figures from this unit's documentation. Part numbers appear only when pulled from this unit's own service manual. Always confirm intervals and pricing against the manufacturer.
NIBP cuff & hose
Consumable per patient.
Class Periodic replacementRel. cost $R&R Easy
Rechargeable backup battery
Class Periodic replacementRel. cost $$R&R Fairly easy
Display / touch assembly
Class Periodic replacementRel. cost $$$R&R Difficult
ECG patient cable & lead set
High-turnover; keep inventory.
Class Frequent wear itemRel. cost $$R&R Easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| NIBP cuff & hose Consumable per patient. | Periodic replacement | $ | Easy |
| Rechargeable backup battery | Periodic replacement | $$ | Fairly easy |
| Display / touch assembly | Periodic replacement | $$$ | Difficult |
| ECG patient cable & lead set High-turnover; keep inventory. | Frequent wear item | $$ | Easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Routine cable and lead-wire inspection for fraying/wear
- ·Battery conditioning cycle
- ·NIBP calibration check against a reference manometer
- ·ECG / SpO2 accuracy verification against a patient simulator
- ·Annual electrical safety test
Troubleshooting Approach
A structured starting point derived from the failure modes above. Follow the manufacturer's service documentation for the actual procedure.
Symptom: ECG lead-off / artifact
- Confirm the presentation - typically flat or noisy ECG, frequent lead-off alarms - and note the exact alarm or message and the conditions when it occurs.
- Check the most likely cause first: worn electrodes, loose leads, or dry gel.
- Isolate the affected subsystem using the manufacturer's functional check or self-test, where one is provided.
- If the fault is confirmed and not a field adjustment, service or replace the eCG patient cable & lead set per the manufacturer's service documentation.
- Return the device to service only after the manufacturer's functional and applicable electrical-safety checks pass.
- Record the findings, any parts used, and the verification results in the maintenance history.
Symptom: SpO2 probe / sensor failure
- Confirm the presentation - typically no pleth, SpO2 drops to --- or false low - and note the exact alarm or message and the conditions when it occurs.
- Check the most likely cause first: lED/photodiode aging or cable damage.
- Isolate the affected subsystem using the manufacturer's functional check or self-test, where one is provided.
- If the fault is confirmed and not a field adjustment, service or replace the spO2 sensor (adult/ped/neo) per the manufacturer's service documentation.
- Return the device to service only after the manufacturer's functional and applicable electrical-safety checks pass.
- Record the findings, any parts used, and the verification results in the maintenance history.
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- ICU / CCU
- Emergency Department
- OR / PACU
- General med-surg floors
- Step-down units
- Telemetry units
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →