CYBEX VR3
CYBEX · Model VR3
Multi-Function: offers a wide variety of exercises for all non-disabled and disabled users. Large Stability Handles: Two large stability handles provide wheelchair and other users with the ability to stabilize when performing unilateral (single arm) exercises. Large Stability Handles: Large type instructions with clear fonts, including graphic instructions to suit all users. Laser Cut Numbers: large laser cut numbers on vertical height adjustment pole. Low Start Weight: Low 2.5 kg start weights and 1.25 kg increments permit single arm exercise for users with stroke or other upper body impairment.
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Cable fraying or broken
HighSymptoms: Visible broken strands, cable slips off a pulley, weight stack drops or binds.
Root cause: Fatigue and abrasion of the lifting cable at the pulleys and end fittings.
Pulley bearing wear
MediumSymptoms: Squeal or grinding, rough or notchy cable travel.
Root cause: Worn pulley bearing or a bent pulley.
Weight-stack guide-rod bind
MediumSymptoms: Stack sticks, uneven or noisy travel, selector pin hard to insert.
Root cause: Bent or dry guide rods, worn stack bushings.
Upholstery / grip wear
LowSymptoms: Torn seat or back pad, cracked hand grips.
Root cause: Normal wear.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Lifting cable assembly
Class Periodic replacementRel. cost $$R&R Moderate
Pulley and bearing set
Class Periodic replacementRel. cost $$R&R Moderate
Guide rods and stack bushings
Class Major service partRel. cost $$R&R Moderate
Selector pin
Class Periodic replacementRel. cost $R&R Easy
Upholstery pads / hand grips
Class Periodic replacementRel. cost $$R&R Fairly easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Lifting cable assembly | Periodic replacement | $$ | Moderate |
| Pulley and bearing set | Periodic replacement | $$ | Moderate |
| Guide rods and stack bushings | Major service part | $$ | Moderate |
| Selector pin | Periodic replacement | $ | Easy |
| Upholstery pads / hand grips | Periodic replacement | $$ | Fairly easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Cable damage or slipping
- Take the machine out of service.
- Inspect the full cable length and both end fittings for broken strands.
- Replace the cable assembly and route it correctly over every pulley.
- Set the cable tension per the Cybex spec.
- Cycle the full range and confirm smooth stack travel.
Symptom: Noisy or binding stack
- Spin each pulley by hand and feel for bearing roughness.
- Clean and lightly lubricate the guide rods.
- Replace worn pulley bearings or stack bushings.
- Check the guide rods are straight.
- Confirm quiet, even travel through the range.
Technical Specs
- Height
- 92 in
- Length
- 51 in
- Weight
- 580 lbs
- Width
- 54 in
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio