ARKRAY USA Advance Intuition
ARKRAY USA · Model Advance Intuition
Fast, simple 2-step testing. Code chip calibration. One button memory recall. Guide-Me Curve™ directs the finger to the target area. Fast capillary action wicks sample into the test strip. Small blood sample - only 3 µL. Plasma referenced results. Biosensor technology. Wide test range 30-550 mg/dL. Large test strips are easy to handle especially for persons with dexterity or vision problems. Custom design ensures easy handling, fast testing. Capillary action quickly wicks the sample into the test chamber. Clear view of sample chamber ensures accurate results. Small sample size of only 3 µL. Automatic on/off with insertion of test strip.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Result / QC failure
HighSymptoms: Result flagged or biased, QC control out of range, strip / cartridge error code.
Root cause: Expired or mishandled strips / cartridges, a temperature / hematocrit interference, or an optics / electrode fault.
Strip / cartridge port fault
MediumSymptoms: Strip not detected, error on insertion, intermittent contact.
Root cause: Contaminated or worn strip-port contacts / optics.
Will not power on / battery fault
MediumSymptoms: Dead unit, short battery life, will not charge.
Root cause: Depleted or aged battery.
Barcode / connectivity fault
LowSymptoms: Operator / lot barcode will not scan, results not sent to the docking / LIS.
Root cause: Barcode reader or the docking-station / wireless link.
Display / button fault
LowSymptoms: Missing segments, unresponsive buttons.
Root cause: Display or keypad fault.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Test strips / cartridges
Class Frequent wear itemRel. cost $$R&R Easy
QC control solutions
Class Frequent wear itemRel. cost $R&R Easy
Battery
Class Frequent wear itemRel. cost $R&R Easy
Strip-port contacts / optics module
Class Periodic replacementRel. cost $$R&R Moderate
Docking station / barcode reader
Class Periodic replacementRel. cost $$R&R Fairly easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Test strips / cartridges | Frequent wear item | $$ | Easy |
| QC control solutions | Frequent wear item | $ | Easy |
| Battery | Frequent wear item | $ | Easy |
| Strip-port contacts / optics module | Periodic replacement | $$ | Moderate |
| Docking station / barcode reader | Periodic replacement | $$ | Fairly easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Result or QC failure
- Repeat with a fresh strip / cartridge from a correctly stored, in-date vial.
- Run the QC control solutions at each level.
- Confirm the meter is coded / calibrated to the current strip lot.
- Clean the strip port per the manual.
- Quarantine the strip lot if QC fails; replace the meter if QC still fails with good strips.
Symptom: Strip not detected
- Inspect and clean the strip-port contacts / optics.
- Try several strips from a fresh vial.
- Check for physical damage to the port.
- Replace the battery.
- Replace the meter if it will not read good strips.
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio