CHAIRSIDE
Zest Anchors, LLC · Model 09576
A rotary cutting device made from high-grade carbon steel with the working end typically formed with cutting planes, e.g., spiralled flutes, and which is designed to fit into a dental handpiece that provides the rotation allowing the user to cut hard structures in the mouth, such as teeth or bone. It can also be used to cut hard metals, plastics, porcelains and similar materials intended for use in the fabrication of dental devices. It is available in various shapes (e.g., cylinder, disk, sphere, oval). This is a reusable device.
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Technical Specs
- MRI safety
- Labeling does not contain MRI Safety Information
- Sterile
- No
- Single use
- No
- Prescription use
- Rx only
- FDA distribution status
- In Commercial Distribution
- Device type (GMDN)
- Steel dental bur, reusable
- FDA product classification
- BUR, DENTAL
- Manufacturer support
- +1 800-262-2310 · quality@zestdent.com
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →