O2 VECTOR 6 20x20x2.5"
Vicair B.V. · Model OVR6/5050
A padded device designed to provide support, comfort, and assistance to the occupant of a wheelchair typically by improving posture, providing back and/or side support, compensating for seat height, relieving stress points, and providing pressure alleviation for the buttocks, lumbar region, and the legs, and/or by providing an antislip mechanism. The device is typically situated behind the lower lumbar region of the back or under the buttocks and/or legs while the occupant is seated. This is a reusable device.
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Technical Specs
- Width
- 20 Inch
- Depth
- 20 Inch
- MRI safety
- Labeling does not contain MRI Safety Information
- Sterile
- No
- Single use
- No
- FDA distribution status
- In Commercial Distribution
- Device type (GMDN)
- Wheelchair seat cushion
- FDA product classification
- CUSHION, WHEELCHAIR
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →