Stryker SDC Pro 2
Stryker · Model SDC Pro 2
Stryker SDC Pro 2 Image Management System The Endoscopy SDC Pro 2 DVD system seamlessly integrates into your typical OR work flow. It can be connected to existing video monitors and endoscopy systems, as well as easily store images and control digital video operations form the sterile field using a wireless remote control, camera head buttons, or by using the touchscreen.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
No or distorted recording / capture
HighSymptoms: Black or corrupt recorded video, no signal from the source, dropped frames.
Root cause: Input cable / format mismatch, a capture-card fault, or the source not outputting.
Storage drive full or failing
MediumSymptoms: Cannot start a recording, slow operation, drive errors.
Root cause: Internal drive near capacity or degrading.
Optical / USB / network export fault
MediumSymptoms: Discs will not burn, USB media not recognised, network export fails.
Root cause: Optical drive, USB port, media, or network configuration.
No output to the room display
MediumSymptoms: Recorder runs but the monitor shows nothing.
Root cause: Video-output port or cable / pass-through fault.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Video capture card
Class Major service partRel. cost $$$R&R Moderate
Internal storage drive / SSD
Class Periodic replacementRel. cost $$R&R Moderate
Optical drive
Class Periodic replacementRel. cost $$R&R Fairly easy
Video I/O cables
Class Periodic replacementRel. cost $R&R Easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Video capture card | Major service part | $$$ | Moderate |
| Internal storage drive / SSD | Periodic replacement | $$ | Moderate |
| Optical drive | Periodic replacement | $$ | Fairly easy |
| Video I/O cables | Periodic replacement | $ | Easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: No or corrupt capture
- Confirm the source device is on and outputting the expected format / resolution.
- Reseat and, if possible, substitute the input cable.
- Try a known-good source.
- Check the recorder's input-status indicators.
- If input is confirmed good, suspect the capture card.
Symptom: Cannot record / export
- Check the internal drive free space and health.
- Delete or archive old studies.
- Try known-good optical or USB media.
- Replace the optical or storage drive as indicated.
- Verify a full record-and-export cycle.
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio