Amico Heron Tablet Mount
Amico · Model Heron Tablet Mount
Height adjustable Sitting to standing position Folds easily to wall Easy to clean surfaces Ships assembled All inclusive warranty.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Height / fold mechanism drift or bind
MediumSymptoms: Mount creeps or will not hold height, stiff to fold to the wall.
Root cause: Worn friction / gas-assist or a contaminated slide.
Tablet cradle / clamp fault
LowSymptoms: Tablet loose in the holder, clamp will not grip, cradle cracked.
Root cause: Worn clamp spring or a damaged cradle.
Wall-mount fastener loosening
MediumSymptoms: Whole mount moves at the wall.
Root cause: Mounting fasteners backing out.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Height friction / gas-assist cartridge
Class Major service partRel. cost $$R&R Moderate
Tablet cradle / clamp assembly
Class Major service partRel. cost $R&R Fairly easy
Wall-mount fastener kit
Class Major service partRel. cost $R&R Fairly easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Height friction / gas-assist cartridge | Major service part | $$ | Moderate |
| Tablet cradle / clamp assembly | Major service part | $ | Fairly easy |
| Wall-mount fastener kit | Major service part | $ | Fairly easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Mount will not hold height
- Adjust the friction / gas-assist per the manufacturer's instructions.
- Replace the cartridge if adjustment does not hold.
- Clean and lubricate the slide if it binds.
- Cycle full travel and the fold-to-wall action.
- Confirm it holds at several heights.
Symptom: Tablet loose in the holder
- Inspect the cradle for cracks and the clamp for wear.
- Adjust or replace the clamp spring.
- Replace a cracked cradle.
- Confirm the tablet is retained securely at all angles.
- Check the wall fasteners are tight.