Amico Condor Adjustable Height Channel
Amico · Model Condor Adjustable Height Channel
General Features Patented counterbalance mechanism allows for a 20 lb (9.1 kg) range, ideal for needs of changing technology 17" (43.2 cm) overall height adjustment range provides sit to stand capabilities and can accommodate users of any height This mounting system is ideal for Electronic Medical Records (EMR) and folds back to within 10" (25.4 cm) from the wall (ultra flush hallway application model also available) Intelligent cable management system hides cables for an organized workspace Articulating arms allow caregivers to chart while maintaining eye contact with patients This Condor Patient monitor mounts has ergonomically friendly negative tilt keyboard tray Sealed keyboard tray for infection control Optional secondary work surface for clinicians CPU mounts available in various sizes Height locking knob reduces drift when in use Includes both 75/100mm VESA plates RFID upgrade available.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Counterbalance / height mechanism drift
MediumSymptoms: Work surface creeps up or down, will not hold height, height-locking knob ineffective.
Root cause: Counterbalance spring out of adjustment for the mounted load, or a worn locking knob.
Articulating arm joint wear
MediumSymptoms: Arm sags, will not stay positioned, notchy or loose motion.
Root cause: Worn arm friction/tension joints.
Cable-management chafe
LowSymptoms: Intermittent monitor/CPU signal or power when the arm is folded or moved.
Root cause: Cable pinched at a joint outside the management channel.
Sealed keyboard tray / VESA plate fault
LowSymptoms: Keyboard tray negative-tilt loose, monitor loose on the VESA plate.
Root cause: Worn tray pivot or a loosened 75/100 mm VESA adapter.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Counterbalance spring / height-lock kit
Class Major service partRel. cost $$R&R Moderate
Articulating arm joint / tension kit
Class Major service partRel. cost $$R&R Moderate
Cable-management channel / clip kit
Class Major service partRel. cost $R&R Easy
Keyboard tray pivot / VESA adapter
Class Major service partRel. cost $R&R Fairly easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Counterbalance spring / height-lock kit | Major service part | $$ | Moderate |
| Articulating arm joint / tension kit | Major service part | $$ | Moderate |
| Cable-management channel / clip kit | Major service part | $ | Easy |
| Keyboard tray pivot / VESA adapter | Major service part | $ | Fairly easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Work surface will not hold height
- Note the total mounted weight (monitor + CPU + accessories) vs the 20 lb range.
- Adjust the counterbalance per the Monitor Adjustments section of the manual.
- Check the height-locking knob engages.
- Replace the counterbalance spring if adjustment does not hold.
- Cycle full travel and confirm it holds at several heights.
Symptom: Arm will not stay positioned
- Adjust the arm friction/tension joints.
- Replace the joint/tension kit if adjustment fails.
- Route all cables inside the management channel.
- Confirm the arm folds to spec without pinching a cable.
- Verify the VESA plate and keyboard-tray hardware are tight.