Stryker ADAPT
Stryker · Model ADAPT
24″ HD surgeon monitor HD touchpad user interface with RFID-reader Industrial PC with Intel Core i5 processor Sleek and maneuverable camera arm Computer interface for video (BNC, S-Video), USB and LAN connections Portable and mobile design - approximately 100 lbs. Small footprint - 26.0″ x 25.6″.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Planning / registration software fault
MediumSymptoms: ADAPT planning or intra-op guidance software hangs, dataset will not load, guidance inaccurate.
Root cause: Workstation PC, media / network import, or a software fault.
Display / video-integration fault
MediumSymptoms: No guidance view to the room displays.
Root cause: Video output or cabling fault.
Camera / tracking-hardware fault (if used)
MediumSymptoms: Tracking drifts or drops.
Root cause: Camera or tracker-array fault.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Workstation PC
Class Major service partRel. cost $$$R&R Moderate
Video output hardware
Class Major service partRel. cost $$R&R Moderate
Tracking camera / arrays (if used)
Class Major service partRel. cost $$$R&R Moderate
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Workstation PC | Major service part | $$$ | Moderate |
| Video output hardware | Major service part | $$ | Moderate |
| Tracking camera / arrays (if used) | Major service part | $$$ | Moderate |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Software / import fault
- Restart the workstation.
- Confirm the imaging dataset and case licensing.
- Re-import from known-good media / network.
- Check the video outputs to the displays.
- Contact Stryker support with the error.
Symptom: No guidance view
- Check the video output and cable to the room display.
- Confirm the display input selection.
- Reboot the workstation.
- Swap the video cable.
- Escalate a persistent output fault to Stryker.
Documents & Manuals
No documents available for this device yet.
Safety & Recalls
Synced live from the FDA openFDA API.
- RECALL
Stryker has initiated the recall of its Aria Standard and Specialty Implant Inserters due to complaints of product fracturing.
- RECALL
Stryker has received complaints from customers relating to fracture along the weld that binds the handle to the shaft of the static inserter.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio