Philips Azurion 7 F20 and C20
Philips Healthcare · Model Azurion 7 F20 and C20
Insightful Live Image Guidance - expand capabilities to perform challenging procedures with confidence Enhance Visibility - your vascular procedures benefit from excellent image quality and a wider anatomical coverage Save Time - team members can work on all activities - at one or more work-spots - without interrupting each other Simplify Set-Up and Operation - the system uses ProcedureCards that can be fully customized to simplify and standardize system set-up for all cases and users Full Control at Table Side - pre-procedural data, multi-modality imaging from PACS and other sources, and interventional applications can be displayed Manage Dose Efficiently - includes ClarityIQ, x-ray imaging technology which provides hight quality imaging for a comprehensive range of clinical procedures.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Image quality degradation
HighSymptoms: Noisy, low-contrast or artefacted fluoro / DSA images, poor detail.
Root cause: X-ray tube aging, flat-panel detector degradation, or a collimator / filter fault.
C-arm / stand positioning fault
HighSymptoms: Gantry rotation, angulation or the L-arm / ceiling stand will not move or gives a position error / collision stop.
Root cause: Drive motor, encoder, brake, or a collision-sensor fault.
Patient table movement fault
MediumSymptoms: Table float, tilt, cradle or height will not move or drifts.
Root cause: Table drive / brake, the tabletop float solenoid, or a control fault.
X-ray generator / exposure fault
HighSymptoms: Exposure inhibited, kV / mA error, tube-overload or thermal interlock.
Root cause: Generator fault, tube thermal limit, or the cooling system.
Workstation / FlexVision display or network fault
MediumSymptoms: Review workstation or the large in-room monitor blank, no images to PACS, module not communicating.
Root cause: Video routing, a workstation fault, or a network / PACS-interface fault.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
X-ray tube assembly
OEM service; image-quality re-calibration required.
Class Major service partRel. cost $$$$R&R Expert-level
Flat-panel detector
Class Major service partRel. cost $$$$R&R Expert-level
C-arm / stand drive motor & encoder
Class Major service partRel. cost $$$$R&R Expert-level
Table drive / float solenoid
Class Major service partRel. cost $$$R&R Difficult
Tube cooling unit / heat exchanger
Class Major service partRel. cost $$$R&R Difficult
Review workstation / video-routing hardware
Class Major service partRel. cost $$$R&R Moderate
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| X-ray tube assembly OEM service; image-quality re-calibration required. | Major service part | $$$$ | Expert-level |
| Flat-panel detector | Major service part | $$$$ | Expert-level |
| C-arm / stand drive motor & encoder | Major service part | $$$$ | Expert-level |
| Table drive / float solenoid | Major service part | $$$ | Difficult |
| Tube cooling unit / heat exchanger | Major service part | $$$ | Difficult |
| Review workstation / video-routing hardware | Major service part | $$$ | Moderate |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Poor image quality
- This is an OEM-service angio system - a BMET's role is triage and coordination with Philips.
- Run the system's image-quality / detector calibration test and note the results.
- Check the tube hour / exposure counters and the cooling-system status.
- Review recent QA / dose trends.
- Escalate a confirmed tube or detector degradation to Philips; keep the room down for anything affecting dose or image integrity.
Symptom: Positioning or exposure interlock
- Note the exact fault code from the console / geometry display.
- Check for collision-sensor activation or a physical obstruction and clear it.
- Verify the table and stand emergency stops are reset.
- Check the generator / tube thermal status.
- Escalate a drive, generator or tube fault to Philips.