Siemens Xprecia Stride
Siemens Healthineers · Model Xprecia Stride
Touchscreen features include bright-color interface with step-by-step instructions help guide the user. Lot calibration using integrated bar-code reader. Test strip eject button reduces potential biohazard exposure. Operator lockout feature restricts analyzer use to trained staff only. Design is compact and portable to enable fast, efficient patient testing at the point of care. Test requires only small sample applied at tip of strip. Lab confirmatory testing may be reduced because of good correlation to lab results. Bar-code scanner offers patient and operator ID entry.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
INR result questionable / QC failure
HighSymptoms: INR does not match the clinical picture or a lab draw, liquid QC fails.
Root cause: Expired or heat-damaged strips, a wrong-technique sample (too small / too slow / air), or use outside the operating temperature range.
Error code during a test
MediumSymptoms: Numbered error on the display, result suppressed.
Root cause: A specific strip / sample / temperature / meter condition indexed in the error-code list.
Strip not detected / will not start
MediumSymptoms: Meter does not recognise the test strip.
Root cause: Contaminated strip-port contacts or a damaged strip.
Battery / power fault
MediumSymptoms: Short battery life, will not power on or charge.
Root cause: Depleted or aged battery.
Connectivity / data-transfer fault
LowSymptoms: Results will not sync via the base / Bluetooth.
Root cause: Docking base, Bluetooth pairing, or the connectivity module.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Test strips
Store per the insert; heat damages them.
Class Frequent wear itemRel. cost $$R&R Easy
Liquid QC controls
Class Frequent wear itemRel. cost $$R&R Easy
Rechargeable battery
Class Frequent wear itemRel. cost $R&R Easy
Strip-port contact assembly
Class Periodic replacementRel. cost $$R&R Moderate
Docking / connectivity base
Class Periodic replacementRel. cost $$R&R Easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Test strips Store per the insert; heat damages them. | Frequent wear item | $$ | Easy |
| Liquid QC controls | Frequent wear item | $$ | Easy |
| Rechargeable battery | Frequent wear item | $ | Easy |
| Strip-port contact assembly | Periodic replacement | $$ | Moderate |
| Docking / connectivity base | Periodic replacement | $$ | Easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: INR result questionable / QC fails
- Repeat with a new strip from a correctly stored, in-date vial and a fresh fingerstick applied within seconds.
- Run the liquid QC.
- Check the operating temperature.
- If QC fails with good strips, quarantine the lot; if it passes but patient INR still disagrees with the lab, refer the meter.
- Contact Siemens if a fault code persists.
Symptom: Error code / strip not detected
- Note the error code and look it up in the user guide.
- Clean the strip-port contacts.
- Retry with a fresh strip.
- Fully charge the battery.
- Contact Siemens if the code persists.
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio