Oakworks PG300
Oakworks · Model PG300
• Motion 1 – Powered Height Range • Motion 2 – Powered +15º/-15º Tilting • Motion 3 – Powered 0-80º Backrest • Multi-function foot control • Paper Roll Holder • Padding – 3” (8 cm) or 4” (10 cm) Comfort Foam™ • Fabric – Premium PVC Free TerraTouch™ • FDA listed, ETL approved, CE marked
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Technical Specs
- Height
- 22 to 38 inches
- Length
- 74 in
- Weight
- 300 lbs
- Patient Weight Capacity
- 550 lbs
- Width
- 27 in
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →