Medical International Research Spirobank II Smart
Medical International Research · Model Spirobank II Smart
PRE and POST - Bronchodilator comparison. Spirometry test interpretation - Embedded Temperature sensor for BTPS conversion. Memory up to 10.000 Spirometry tests. Rechargeable, long-life battery. Traffic light health indicator - For immediate test interpretation. Backlit, high-resolution display - With on-screen results and curves preview for immediate data assessment.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Flow / volume accuracy check fails
HighSymptoms: 3-litre syringe verification outside tolerance, questionable FEV1/FVC.
Root cause: Damaged or contaminated turbine flow head, or debris/moisture in the flow path; use only the manufacturer's turbines.
Will not power on / short battery life
MediumSymptoms: Dead unit or frequent low-battery.
Root cause: Depleted battery or a battery-contact fault.
PC / comms fault
MediumSymptoms: Software will not connect, no data transfer.
Root cause: USB/Bluetooth link, cable, or driver.
Printer / touchscreen fault
LowSymptoms: No printout, or an unresponsive touchscreen / stylus.
Root cause: Print head / paper, or the display.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Reusable / disposable turbine
Class Periodic replacementRel. cost $$R&R Easy
Disposable mouthpieces / bacterial filters
Class ConsumableRel. cost $R&R Easy
Battery
Class Frequent wear itemRel. cost $R&R Easy
Communication cable
Class Periodic replacementRel. cost $R&R Easy
3-litre calibration syringe
Class Major service partRel. cost $$R&R Easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Reusable / disposable turbine | Periodic replacement | $$ | Easy |
| Disposable mouthpieces / bacterial filters | Consumable | $ | Easy |
| Battery | Frequent wear item | $ | Easy |
| Communication cable | Periodic replacement | $ | Easy |
| 3-litre calibration syringe | Major service part | $$ | Easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Calibration verification fails
- Fit a clean / known-good turbine and dry the flow path.
- Repeat the 3-litre syringe check at varied speeds.
- Confirm the environmental / BTPS settings.
- Replace the flow sensor if it still fails.
- Re-verify and record the check.
Symptom: Software will not connect
- Confirm the software is installed and the driver loaded.
- Try another USB port / cable or re-pair Bluetooth.
- Check the device is seen by the operating system.
- Reinstall the software if needed.
- Re-test with a known-good PC.
Technical Specs
- Height
- 55 mm
- Length
- 25 mm
- Weight
- 5 oz
- Width
- 160 mm
Documents & Manuals
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio