HandyBelt™
Liko AB · Model 3760014
Manual patient lifting belt/harness
Intended use: A device used to assist healthcare professionals or attending persons to physically move and lift a patient or a person with a disability (e.g., from the floor to a bed). The device is typically made strong textile materials (e.g., nylon or canvas) consisting of belts/harnesses. The device will typically require two persons to safely perform the lift. This is a reusable device.
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Technical Specs
- MRI safety
- Labeling does not contain MRI Safety Information
- Sterile
- No
- Single use
- No
- FDA distribution status
- In Commercial Distribution
- Device type (GMDN)
- Manual patient lifting belt/harness
- FDA product classification
- AID, TRANSFER
- Manufacturer support
- +1(800)445-3730 · us.customerservice@hillrom.com
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →