Konica Minolta DRYPRO Model 771 Laser Imager
Konica Minolta · Model DRYPRO Model 771 Laser Imager
• The DRYPRO 771 uses a front mounted, one-channel tray and allows processing in a brightly lit room. • Film size is selectable for added flexibility. • DRYPRO 771 is used for all modalities as well as CR, enhancing functionality within the department. • Easy to reach, user-friendly control panel indicates operating status for operational flexibility. • Timer function starts operation at a user-specified time. • High-speed processing of up to 110 films/hour and energy-saving design offer optimum performance and versatility. • First image is processed as quickly as 106 seconds for 14x17 inch film. • Supply tray shutter prevents accidental film exposure, reducing your cost of operation on supplies.
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
Typical Failure Modes
Failure patterns typical of this equipment class - general BMET reference, not verified against this exact unit's own service history unless flagged. Severity is a category-level estimate.
Print head / thermal head wear
HighSymptoms: Streaking, missing lines, or degraded print quality.
Root cause: Thermal head element wear from print-cycle count.
Media jam / feed fault
MediumSymptoms: Paper, film, or media misfeed or jam mid-print.
Root cause: Worn feed rollers or debris in the media path.
Network / driver connectivity fault
MediumSymptoms: Won't receive print jobs from the connected workstation or modality.
Root cause: Network configuration, driver, or interface card fault.
Ribbon / ink / toner depletion
LowSymptoms: Faded, streaked, or blank output.
Root cause: Consumable exhausted or improperly seated.
Serviceable Parts & Consumables
The parts a BMET typically services on this class of equipment. Service class and relative cost are general engineering estimates for the category, not figures from this unit's documentation. Part numbers appear only when pulled from this unit's own service manual. Always confirm intervals and pricing against the manufacturer.
Network interface / driver board
Class Major service partRel. cost $$$R&R Moderate
Print head / thermal head assembly
Class Periodic replacementRel. cost $$$R&R Moderate
Ribbon / ink or toner cartridge
Consumable - replace per print-volume schedule.
Class ConsumableRel. cost $R&R Easy
Media feed roller set
Class Periodic replacementRel. cost $$R&R Fairly easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Network interface / driver board | Major service part | $$$ | Moderate |
| Print head / thermal head assembly | Periodic replacement | $$$ | Moderate |
| Ribbon / ink or toner cartridge Consumable - replace per print-volume schedule. | Consumable | $ | Easy |
| Media feed roller set | Periodic replacement | $$ | Fairly easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Troubleshooting Approach
A structured starting point derived from the failure modes above. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Print head / thermal head wear
- Confirm the presentation - typically streaking, missing lines, or degraded print quality.
- Check the most likely cause first: thermal head element wear from print-cycle count.
- Inspect the affected subsystem against the manufacturer's inspection checklist.
- If the fault is confirmed and not a field adjustment, service or replace the print head / thermal head assembly per the manufacturer's service documentation.
- Return the device to service only after the manufacturer's functional and applicable electrical-safety checks pass.
- Record the findings, any parts used, and the verification results in the maintenance history.
Symptom: Media jam / feed fault
- Confirm the presentation - typically paper, film, or media misfeed or jam mid-print.
- Check the most likely cause first: worn feed rollers or debris in the media path.
- Inspect the affected subsystem against the manufacturer's inspection checklist.
- If the fault is confirmed and not a field adjustment, service or replace the ribbon / ink or toner cartridge per the manufacturer's service documentation.
- Return the device to service only after the manufacturer's functional and applicable electrical-safety checks pass.
- Record the findings, any parts used, and the verification results in the maintenance history.
Technical Specs
- Printing Resolustion
- 78.6 µm
- Height
- 44.2 in
- Throughput
- 110 films/hour
- Length
- 23.6 in
- Film Drawers
- 1
- Power Requirements
- 120 VAC
- Weight
- 385 lbs
- Time to First Film
- 106 sec
- Width
- 24.8 in
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →