Olympus
Gyrus ACMI, LLC · Model LCCONS100
A device intended to be used for the in situ removal of blood/debris from the lens of an endoscope, or other endoscopic device, by directing gas or liquid to the edge of the lens. It is a tubular device, made from metal or plastic, intended to be attached to the inserted portion of the endoscopic device whereby gases/fluids are directed from a source (e.g., manual pump, drop infusion pack) to the lens. This is a reusable device.
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Technical Specs
- MRI safety
- Labeling does not contain MRI Safety Information
- Sterile
- No
- Single use
- No
- Prescription use
- Rx only
- FDA distribution status
- In Commercial Distribution
- Device type (GMDN)
- Endoscope lens cleaner, gas/fluid, reusable
- FDA product classification
- NASOPHARYNGOSCOPE (FLEXIBLE OR RIGID)
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →