Gymna ONE
Gymna · Model ONE
Treatment table i-Control offers two ways of height adjustment: a continuous mode for quick up and down movement and a start-stop mode for small pulsed adjustments, finding the optimal treatment position. The innovative Ergomax face support* is made of soft, seamless and comfortable foam. It is ergonomically-shaped, removable, washable and can be positioned in two directions. Gymna. ONE is equipped with lateral supports. These make it possible to maintain an ergonomic working position.
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
A powered function will not run
HighSymptoms: Height / back / tilt does not respond to the hand or foot control.
Root cause: Foot/hand control fault, a linear actuator, a control-box relay, or a limit switch.
Section drifts or will not hold
MediumSymptoms: Table settles under load after positioning.
Root cause: Actuator backdrive or a gas-spring fault.
Control unresponsive
MediumSymptoms: Intermittent or dead hand/foot control.
Root cause: Cable, contacts, or fluid ingress.
Noisy or slow movement
LowSymptoms: Rumble or sluggish travel on one or more functions.
Root cause: Worn actuator or unlubricated joints.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Linear actuator
Class Major service partRel. cost $$$R&R Moderate
Hand / foot control
Class Periodic replacementRel. cost $$R&R Fairly easy
Control box / relay
Class Major service partRel. cost $$$R&R Moderate
Gas spring (back assist)
Class Major service partRel. cost $R&R Moderate
Limit switch
Class Major service partRel. cost $R&R Moderate
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Linear actuator | Major service part | $$$ | Moderate |
| Hand / foot control | Periodic replacement | $$ | Fairly easy |
| Control box / relay | Major service part | $$$ | Moderate |
| Gas spring (back assist) | Major service part | $ | Moderate |
| Limit switch | Major service part | $ | Moderate |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: A powered function is dead
- Verify mains power and any fuse.
- Operate the function and listen for the actuator; test other functions to isolate the control vs the actuator/box.
- Substitute a known-good hand/foot control.
- Check the limit switches.
- Replace the actuator, control or relay as isolated, then load-test.
Symptom: Section drifts down
- Note how fast it settles and under what load.
- Check the actuator for backdrive and the gas spring.
- Replace the actuator or gas spring.
- Confirm it holds at several positions.
- Re-check limit-switch function.
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio