BC Group UPM DT-1000 PA
BC Group · Model UPM DT-1000 PA
• Fastest response time= less than 3 seconds • Highest Resolution: 1mW OR .1 mg in grams mode • Five point certification (NIST Traceable) • Measurement Range: 0-30WATTS • Frequency Range: .5TO 10MHZ • Measures total pulsed or continuous power • Automatic zeroing and stabilization • Digital display and RS-232 Interface
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →