APAshton Pumpmatic, Inc. · Model 201
A device designed for the manual withdrawal, transfer, and injection of small volumes of fluid materials. It is made of glass or plastic and is designed as a long thin tube, typically with graduations along its length. The user will typically attach a mouthpiece and create a partial vacuum within the pipette by gently sucking the air from inside the tube inducing the liquid to enter the pipette, or achieve the same action with a squeezable bulb. Closing the mouthpiece or the user end of the pipette will hold the liquid therein; dispensing is done by controlled venting of air into the user end or squeezing the bulb.
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
No documents available for this device yet.
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →