FLOWTRON ACS900
Arjohuntleigh AB · Model 526000-02-P
DVT Prevention Compression Pump - ACS900 PUMP US OR TUBE SET
Intended use: A system used for the noninvasive treatment and prevention of venous disorders and sequelae such as oedema, deep vein thrombosis (DVT) and pulmonary embolism (PE). It functions by intermittently applying pressure to a patient's arms or legs to promote venous blood flow at timed intervals. This is achieved through the cyclical inflation and deflation of a single-chambered stocking, sleeve, or suit applied to the extremities. The system typically consists of a compression pump, control and timing mechanism, tubing, and pneumatic stocking(s) or suit.
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Technical Specs
- MRI safety
- Labeling does not contain MRI Safety Information
- Sterile
- No
- Single use
- No
- Prescription use
- Rx only
- FDA distribution status
- In Commercial Distribution
- Device type (GMDN)
- Intermittent venous compression system
- FDA product classification
- SLEEVE, LIMB, COMPRESSIBLE
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →