APEL BR-5200
APEL · Model BR-5200
Very quick measurement - Max. one second measurement time. Computer connection - Has an RS-232C and a USB interface for connection with computer. No lamp replacement - Does not need a lamp replacement thanks to the LED light source. Free of calibration hassle - Once BR-5200 is calibrated, no more daily calibration is required. Easy set of the sample tube - A sample gauge provided on the surface of BR-5200, which indicates the proper sample volume to be inspected. Only simple action is required to set the capillary tube into the holder. Handles hemolysis and turbidity easily - The dual wavelength measuring method of BR-5200 eliminates interference of hemolysis and turbidity.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Inaccurate bilirubin readings / QC failure
HighSymptoms: Result disagrees with a reference / control, drift over time.
Root cause: Optics contamination, lamp aging, a dirty or scratched cuvette, or calibration drift.
Lamp / light-source failure
MediumSymptoms: Low signal, will not read, lamp warning.
Root cause: Lamp at end of life.
Sample-handling / cuvette fault
MediumSymptoms: Bubble or short-sample errors, inconsistent readings.
Root cause: Air bubble in the micro-sample, or a worn / dirty cuvette.
Display / keypad fault
LowSymptoms: Unresponsive keypad, dim display.
Root cause: Aged display or keypad.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Lamp
Class Periodic replacementRel. cost $$R&R Moderate
Cuvette
Class Frequent wear itemRel. cost $R&R Easy
Optical filter / detector assembly
Class Major service partRel. cost $$$R&R Difficult
Calibration standard
Class Frequent wear itemRel. cost $$R&R Easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Lamp | Periodic replacement | $$ | Moderate |
| Cuvette | Frequent wear item | $ | Easy |
| Optical filter / detector assembly | Major service part | $$$ | Difficult |
| Calibration standard | Frequent wear item | $$ | Easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Readings inaccurate
- Run the calibration standard / control and compare to the assigned value.
- Clean the cuvette and the optical path.
- Replace the lamp if the signal is low.
- Recalibrate per the manual.
- Re-verify with the control before reporting patient results.
Symptom: Bubble / short-sample errors
- Refill the cuvette avoiding bubbles.
- Inspect the cuvette for scratches or residue.
- Replace the cuvette.
- Confirm the correct fill volume.
- Re-run the sample.
Technical Specs
- Height
- 100 mm
- Length
- 200 mm
- Weight
- 0.9 kg
- Width
- 150 mm
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio