Amico Jared Fetal Monitor
Amico · Model Jared Fetal Monitor
OB Carts Amico's Fetal Monitor Carts are aesthetically attractive carts that conceal medical monitoring systems in Labor and Delivery environments. These units can be fully customized to suit clinicians' needs, and are made to match the existing casework in the room. Different drawer/door combinations are available as well as an integrated pull-out keyboard tray for easy access. Since the dimensions can be customized, these carts can be made to fit the exact requirements for the latest hardware available on the market. CPU Mounts and Barcode Scanners are also available. Single and Dual Height adjustable Monitor Mounts can be added to these carts directly from the factory to provide a one stop shop solution for your cart.
Key tips
- ·A no-signal/flatline alarm gets checked on the patient first, not the monitor - rule out a real clinical event before troubleshooting.
- ·Recalibrate NIBP against a reference manometer, not just a self-test pass.
- ·Reused patient cables (SpO2, ECG leads) are a common source of intermittent-fault complaints - swap the cable before the module.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Poor or lost FHR trace
HighSymptoms: Fetal heart rate drops out, doubles / halves, or is noisy; hard to keep a trace.
Root cause: Worn ultrasound (Doppler) transducer, low gel, or a transducer-cable fault.
Toco / contraction channel fault
MediumSymptoms: Contraction trace flat, drifting, or will not zero.
Root cause: Worn toco transducer or its cable.
Printer / recorder fault
MediumSymptoms: No trace on paper, faint print, paper jam, wrong speed.
Root cause: Thermal print head, paper handling, or the paper-speed setting.
NIBP / SpO2 (maternal) fault
LowSymptoms: Maternal NIBP or SpO2 drops or is implausible.
Root cause: Cuff / hose or sensor, or the parameter module.
Display / central-link fault
LowSymptoms: Blank display, not shown on the OB surveillance system.
Root cause: Display or the network / surveillance link.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Ultrasound (Doppler) transducer
Class Periodic replacementRel. cost $$R&R Easy
Toco transducer
Class Periodic replacementRel. cost $$R&R Easy
Thermal print head / paper
Class Periodic replacementRel. cost $R&R Fairly easy
Transducer belts
Class Frequent wear itemRel. cost $R&R Easy
Maternal NIBP cuff / SpO2 sensor
Class Frequent wear itemRel. cost $$R&R Easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Ultrasound (Doppler) transducer | Periodic replacement | $$ | Easy |
| Toco transducer | Periodic replacement | $$ | Easy |
| Thermal print head / paper | Periodic replacement | $ | Fairly easy |
| Transducer belts | Frequent wear item | $ | Easy |
| Maternal NIBP cuff / SpO2 sensor | Frequent wear item | $$ | Easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Routine cable and lead-wire inspection for fraying/wear
- ·Battery conditioning cycle
- ·NIBP calibration check against a reference manometer
- ·ECG / SpO2 accuracy verification against a patient simulator
- ·Annual electrical safety test
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Losing the fetal heart rate trace
- Apply fresh gel and reposition the ultrasound transducer for the strongest tone.
- Swap in a known-good ultrasound transducer.
- Flex the transducer cable while watching for dropout.
- Confirm the FHR against a handheld Doppler.
- Replace the transducer if a good one holds the trace.
Symptom: No or poor paper trace
- Confirm the correct paper is loaded the right way up.
- Clean the thermal print head.
- Check the paper-speed setting (1 vs 3 cm/min).
- Print a test pattern.
- Replace the print head if output stays faint.
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- ICU / CCU
- Emergency Department
- OR / PACU
- General med-surg floors
- Step-down units
- Telemetry units
Documents & Manuals
- Amico Jared Series Fetal Monitor Cart Ordering GuideUser Manual · External
- Series Cart Ordering GuideUser Manual · External
- Amico Patient Room Furniture BrochureBrochure · External
- Patient Room Furniture BrochureBrochure · External
- Amico Jared Series Fetal Monitor Carts Spec SheetDocument · External
- Series Carts Spec SheetDocument · External
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio