HTP1500
ADROIT MEDICAL SYSTEMS, INC. · Model HTPS1500
Accessory Rolling Stand for HTP1500 Pump.
Intended use: An electrically-powered device intended to be used as part of a localized circulating-fluid thermal therapy system to pump heated and/or cooled fluid (e.g., water) through an externally applied pack (not included) for localized hot and/or cold therapy for the skin and/or underlying tissues (e.g., muscle) in the treatment of musculoskeletal pain and discomfort. It includes a fluid pump and either a heater, or a means for cold therapy (e.g., refrigeration unit, permitting addition of independently cooled ice water) or both; it does not include an air pump for wrap inflation. It is intended for use in both professional and home settings.
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Pump not running / no flow / pad not at temperature
HighSymptoms: Pump silent or running with no water movement, pad not heating or cooling.
Root cause: Air lock, low fluid, a kinked hose, a clogged filter, low power, or a heater / chiller fault.
Does not reach or hold set temperature
HighSymptoms: Water not reaching the set point, over- or under-temperature.
Root cause: Heater element or a temperature-sensor / control fault.
Over-temperature safety trip
MediumSymptoms: Unit stops, over-temp indication.
Root cause: Sensor or control fault, or a failed safety thermostat.
Reservoir / connector leak
LowSymptoms: Water pooling, level drops between uses.
Root cause: Cracked reservoir or worn quick-connect couplings.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Circulation pump
Class Periodic replacementRel. cost $$R&R Moderate
Heater element
Class Major service partRel. cost $$R&R Moderate
Temperature sensor / safety thermostat
Class Major service partRel. cost $$R&R Moderate
Inlet filter
Class Frequent wear itemRel. cost $R&R Easy
Therapy pad / wrap and hoses
Class Frequent wear itemRel. cost $$R&R Easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Circulation pump | Periodic replacement | $$ | Moderate |
| Heater element | Major service part | $$ | Moderate |
| Temperature sensor / safety thermostat | Major service part | $$ | Moderate |
| Inlet filter | Frequent wear item | $ | Easy |
| Therapy pad / wrap and hoses | Frequent wear item | $$ | Easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: No flow / not at temperature
- Confirm the reservoir is filled and the pump runs.
- Check hoses and clamps for kinks or occlusions.
- Clean the inlet filter.
- Verify the heater draws current and the water changes temperature.
- Replace the pump or heater / sensor as isolated.
Symptom: Over-temperature trip
- Let the unit cool.
- Compare the displayed temperature to an independent thermometer.
- Replace the temperature sensor if it disagrees.
- Check the safety thermostat.
- Verify the unit holds set point.
Technical Specs
- MRI safety
- Labeling does not contain MRI Safety Information
- Sterile
- No
- Single use
- No
- FDA distribution status
- In Commercial Distribution
- Device type (GMDN)
- Circulating-fluid localized thermal therapy system control unit
- FDA product classification
- Pack, Hot Or Cold, Water Circulating
- Manufacturer support
- 865-458-8600 · kelley@adroitmedical.com
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio