Action®
ACTION PRODUCTS, INC. · Model Wheelchair Back Rest
Twister® Wheelchair Back - Tall
Intended use: A padded support (typically vinyl covered) designed to attach to the back of a wheelchair. It typically replaces the wheelchair's sling upholstery and provides the wheelchair occupant with improved back support, posture, air circulation, and comfort.
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Technical Specs
- MRI safety
- Labeling does not contain MRI Safety Information
- Sterile
- No
- Single use
- No
- FDA distribution status
- In Commercial Distribution
- Device type (GMDN)
- Wheelchair back rest
- FDA product classification
- Cushion, Wheelchair
- Manufacturer support
- 301.797.1414 · service@actionproducts.com
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →