FRU, Nitrous Oxide Regulator, Guardian II
ACCUTRON, INC. · Model 34058-GII
FRU, Nitrous Oxide Regulator, Guardian II
Intended use: An assembly of devices designed to supply compressed medical gases [e.g., oxygen (O2), nitrous oxide (N2O), medical air, surgical-grade air] from a central source to endpoints throughout a medical facility. The system typically consists of several gas supplies (bulk gas, bottled gas with air compressors), a pipework system that includes pressure regulators, pressure relief valves, zone valves, an alarm system with remote or local indicators, emergency backup devices for essential gases, and wall outlet/inlet terminal units.
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Technical Specs
- MRI safety
- Labeling does not contain MRI Safety Information
- Sterile
- No
- Single use
- No
- Prescription use
- Rx only
- FDA distribution status
- In Commercial Distribution
- Device type (GMDN)
- Medical gas pipeline system
- FDA product classification
- Regulator, Pressure, Gas Cylinder
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →