E Yoke Regulator Deluxe
ACCUTRON, INC. · Model 35018
A device designed to hold and secure a single medical gas cylinder of compressed medical gas which is to be used in medical treatment/therapy. The usual gases are, [e.g., oxygen (O2), air, or nitrous oxide (N2O)]. It is used to secure the cylinder both during transport and typically whilst the gas is being used. The device is typically constructed of metal and may be mounted to a medical device service rail system, a bed under transport, or other medical devices requiring medical gas to be present. It is configured to meet the size of the cylinder, typically those of small dimensions.
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Technical Specs
- MRI safety
- Labeling does not contain MRI Safety Information
- Sterile
- No
- Single use
- No
- Prescription use
- Rx only
- FDA distribution status
- In Commercial Distribution
- Device type (GMDN)
- Gas cylinder holder
- FDA product classification
- Yoke Assembly, Medical Gas
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →