VivaGuard Ino

Name: VivaGuard Ino
Brand: Able Diagnostics Inc
SKU: VGM01

ADAble Diagnostics Inc · Model VGM01

VivaGuard Ino Blood Glucose Monitoring System

Intended use: A collection of reagents and other associated materials intended to be used for the quantitative measurement of glucose in a clinical specimen, using an electrometry method. It is typically in a strip format (e.g., screen-printed electrode) for use with a dedicated testing device (not included).

Key tips

·A no-signal/flatline alarm gets checked on the patient first, not the monitor - rule out a real clinical event before troubleshooting.
·Recalibrate NIBP against a reference manometer, not just a self-test pass.
·Reused patient cables (SpO2, ECG leads) are a common source of intermittent-fault complaints - swap the cable before the module.

PM Checklist

Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.

·Routine cable and lead-wire inspection for fraying/wear
·Battery conditioning cycle
·NIBP calibration check against a reference manometer
·ECG / SpO2 accuracy verification against a patient simulator
·Annual electrical safety test

Technical Specs

MRI safety: Labeling does not contain MRI Safety Information
Sterile: No
Single use: Yes
FDA distribution status: In Commercial Distribution
Device type (GMDN): Glucose IVD, kit, electrometry
FDA product classification: System, Test, Blood Glucose, Over The Counter

Typical Location

Where this class of equipment is typically deployed - general reference, not this unit's own placement record.

ICU / CCU
Emergency Department
OR / PACU
General med-surg floors
Step-down units
Telemetry units

Documents & Manuals

View spec sheet (PDF)

No documents available for this device yet.

Troubleshoot this device with Bio

Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.

Ask Bio →