JETi™
ABBOTT VASCULAR INC. · Model WV-JSET
A collection of flexible, noninvasive, double-lumen tubing and associated items intended to provide twin conduits in a surgical irrigation/aspiration system to deliver irrigation solution (e.g., saline) from its source (e.g., gravity feed bag) to a surgical cannula (not included) through one lumen, and provide aspiration (suction) through the other lumen (i.e., enables both irrigation and aspiration), during a surgical procedure (e.g., dental, laparoscopy). The tubing set includes devices such as clamps, filters, spikes, and Y-piece connectors, and may in addition include an integrated manual pump (e.g., a squeeze bulb) or handpiece. This is a single-use device.
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Weak or no aspiration / thrombus removal
HighSymptoms: Poor clot capture, low vacuum at the catheter tip, aspiration alarm.
Root cause: Vacuum pump / canister not sealed, a clogged or kinked catheter, or a worn pump.
Saline-jet / pressurisation fault
HighSymptoms: No or weak high-pressure saline jet, pressure alarm.
Root cause: High-pressure pump, tubing set, or a fitting leak.
Console will not run / control fault
MediumSymptoms: Console dead, foot-pedal unresponsive, will not start a run.
Root cause: Power supply, foot pedal, or control board.
Disposable-set recognition fault
MediumSymptoms: Console will not prime or recognise the tubing / catheter set.
Root cause: Set mis-loaded or a set-detect sensor fault.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Vacuum pump / canister
Class Periodic replacementRel. cost $$$R&R Difficult
High-pressure pump
Class Periodic replacementRel. cost $$$R&R Difficult
Single-use catheter / tubing set
Class ConsumableRel. cost $$R&R Easy
Foot pedal
Class Periodic replacementRel. cost $$R&R Fairly easy
Power supply / control board
Class Major service partRel. cost $$$R&R Difficult
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Vacuum pump / canister | Periodic replacement | $$$ | Difficult |
| High-pressure pump | Periodic replacement | $$$ | Difficult |
| Single-use catheter / tubing set | Consumable | $$ | Easy |
| Foot pedal | Periodic replacement | $$ | Fairly easy |
| Power supply / control board | Major service part | $$$ | Difficult |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Weak aspiration or saline jet
- Fit a fresh disposable set and re-prime.
- Confirm the canister and all connections are sealed and the catheter is not kinked.
- Verify the high-pressure and vacuum pumps reach their set points into the priming path.
- Replace the leaking tubing / fitting.
- Escalate a confirmed pump fault to Abbott.
Symptom: Console will not run
- Confirm mains power and any fuse.
- Test the foot pedal.
- Reload the disposable set exactly per the instructions.
- Check the set-detect sensor.
- Refer the console if it will not power up or recognise a good set.
Technical Specs
- Handling Environment Temperature
- -30°C to 60°C
- Storage Environment Temperature
- 15°C to 25°C
- Handling Environment Humidity
- 10 Percent (%) Relative Humidity to 95 Percent (%) Relative Humidity
- MRI safety
- Labeling does not contain MRI Safety Information
- Sterile
- Yes
- Single use
- Yes
- Prescription use
- Rx only
- FDA distribution status
- In Commercial Distribution
- Device type (GMDN)
- Surgical irrigation/aspiration tubing set
- FDA product classification
- Aspiration thrombectomy catheter
- Manufacturer support
- +1(800)227-9902 · av.customercare@av.abbott.com
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio