VP2000
ABBOTT MOLECULAR INC. · Model 02J11-063
An electrically-powered automated or semi-automated laboratory instrument intended to be used for the processing of clinical tissue specimens [e.g., fixation (encapsulation in paraffin wax), dehydration, infiltration] in preparation for subsequent cytological or histological examination. The device may be a single unit or modular assembly.
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Slide-processing / staining quality poor
HighSymptoms: Weak, uneven or high-background FISH / pretreatment results across a run.
Root cause: Reagent dispense fault, incorrect incubation temperature, or a bath / wash-station issue.
Reagent dispense / probe fault
MediumSymptoms: No or short dispense, probe-position or liquid-level errors.
Root cause: Clogged or worn dispense probe, an empty reagent bottle, or a pump / valve fault.
Temperature control fault
MediumSymptoms: Incubation / hybridization temperature out of range, run fails.
Root cause: Heater element, temperature sensor, or control board.
Slide-transport / gripper jam
MediumSymptoms: Slides not advancing between stations, transport error.
Root cause: Worn transport belt / gripper or a mis-loaded slide rack.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Dispense probe
Class Periodic replacementRel. cost $$R&R Moderate
Reagent pump / valve
Class Periodic replacementRel. cost $$R&R Moderate
Heater element / temperature sensor
Class Major service partRel. cost $$R&R Moderate
Slide-transport belt / gripper
Class Periodic replacementRel. cost $$R&R Difficult
Wash-station / bath assembly
Class Periodic replacementRel. cost $$R&R Moderate
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Dispense probe | Periodic replacement | $$ | Moderate |
| Reagent pump / valve | Periodic replacement | $$ | Moderate |
| Heater element / temperature sensor | Major service part | $$ | Moderate |
| Slide-transport belt / gripper | Periodic replacement | $$ | Difficult |
| Wash-station / bath assembly | Periodic replacement | $$ | Moderate |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Poor staining across a run
- Confirm reagents are in date, correctly loaded and not empty.
- Check the dispense volume at each station.
- Verify incubation / hybridization temperatures against an independent probe.
- Clean the wash stations and baths.
- Re-run a control slide.
Symptom: Dispense or transport fault
- Inspect the dispense probe for a clog or bend and clear it.
- Run the fluidics prime.
- Check the slide rack is loaded correctly.
- Inspect the transport belt / gripper for wear.
- Replace the probe, pump or transport part as isolated.
Technical Specs
- MRI safety
- Labeling does not contain MRI Safety Information
- Sterile
- No
- Single use
- No
- FDA distribution status
- In Commercial Distribution
- Device type (GMDN)
- Tissue processor IVD, automated/semi-automated
- FDA product classification
- STAINER, TISSUE, AUTOMATED
- Manufacturer support
- +1(800)553-7042 · customerservice@abbottmolecular.com
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio