UNICO IP753
UNICO · Model IP753
Head: Seidentopf Trinocular Head with a 80/20 Beam Splitter. Features a 55-75mm Interpupillary Distance Adjustment. Heads rotate 360, One Eye Tube with Diopter Adjustment. Nosepiece: 4-Hole Reverse Nosepiece provides the user with easier Slide Insertion and Manipulation. The Precision Ball Bearings and Internal Stop assure operational ease and durability. Eyepiece: High Eyepoint Widefield 10x/20mm or 15X Eyepieces. Objectives: 4X, 10X, 40XR and 100XR Infinity Objectives. IP753: Achromat Objectives. IP753PL: Plan Achromat Objectives. Focus: The Low Position Coaxial Coarse and Fine Focusing System designed to lessen user fatigue. The Coarse Focus Tension Control allows to increase or decrease the Focusing Tension. The Fine Focusing is graduated at 0.002 mm. Stage: Large Heavy Duty, Built-In Mechanical Stage with Low Coaxial Controls provides larger (180mm x 150mm) Platform with X-Y Travel of 76 mm x 50 mm. Graduated in 0.1 mm assures flexibility. Condenser: Focusable and Centerable Abbe Condenser NA 1.25 with Graduated Iris Diaphragm and Filter Holder. Illuminator: The Built-In Illuminator with Field Diaphragm provides Koehler Type Illumination. The Brightness Intensity Control provides steady even illumination at all levels. Variable Intensity Rheostat Wheel is located on the left side of the base. Electric: UL & CSA Approved Electrical Parts, Three Wire Grounded Electric Cord. 110V-60Hz to 240V-50Hz.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Uneven or dark illumination
MediumSymptoms: Vignetting, dark edges, uneven brightness across the field.
Root cause: Condenser height/aperture wrong, field diaphragm not centred, nosepiece not clicked in, or dirty optics; lamp/LED aging.
Poor image quality / low contrast
MediumSymptoms: Blurry or low-contrast image.
Root cause: Wrong or missing 0.17 mm cover glass, immersion oil on a dry objective, air bubbles in the oil, or condenser aperture mis-set.
Illuminator lamp / LED failure
MediumSymptoms: No or dim light, will not brighten.
Root cause: Lamp / LED at end of life, or a rheostat / driver fault.
Focus / stage / nosepiece wear
LowSymptoms: Focus slips or binds, stage stiff or slips, nosepiece detent worn.
Root cause: Worn focus clutch or dried stage grease.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Illuminator lamp / LED module
Class Periodic replacementRel. cost $R&R Fairly easy
Rheostat / illuminator driver
Class Major service partRel. cost $R&R Moderate
Focus mechanism / clutch kit
Class Major service partRel. cost $$R&R Difficult
Objective lens (DIN achromat)
Class Major service partRel. cost $$$R&R Fairly easy
Mains fuse
Class Major service partRel. cost $R&R Fairly easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Illuminator lamp / LED module | Periodic replacement | $ | Fairly easy |
| Rheostat / illuminator driver | Major service part | $ | Moderate |
| Focus mechanism / clutch kit | Major service part | $$ | Difficult |
| Objective lens (DIN achromat) | Major service part | $$$ | Fairly easy |
| Mains fuse | Major service part | $ | Fairly easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Dark or uneven field
- Click the nosepiece fully into a detent.
- Set the condenser height and aperture and centre the field diaphragm (Kohler).
- Clean the objective, condenser, eyepieces and collector.
- Check / replace the lamp or LED if dim.
- Re-check across objectives.
Symptom: Blurry image
- Fit a 0.17 mm cover glass, slide right-side up.
- Remove immersion oil from dry objectives; use oil only with oil objectives and clear bubbles.
- Set the condenser aperture.
- Clean all optical surfaces.
- Re-evaluate the image.
Technical Specs
- Height
- 15.4 in
- Length
- 10 in
- Weight
- 18 lbs
- Width
- 8.5 in
Documents & Manuals
Related calculators
From BioLab, for work done with this kind of equipment.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio