Unetixs Vascular Freedom V
Unetixs Vascular · Model Freedom V
• 40 mm high density Thermal PlotterTactile keyboard with LED power indicator • Large Backlit LCD display provides alphanumeric data and real time waveforms • Battery powered with external battery charger (in excess of 8 hrs. of continuous use) • Internal clock/calendar (independent 10 year battery) • Dedicated remote control for automatic cuff inflation, bleed, and capture • Starter kit with gel and chart paper • Dedicated remote control for automatic cuff inflation, bleed, and capture
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
Typical Failure Modes
Failure patterns typical of this equipment class - general BMET reference, not verified against this exact unit's own service history unless flagged. Severity is a category-level estimate.
Doppler probe / transducer wear
HighSymptoms: Weak, absent, or noisy Doppler signal.
Root cause: Probe crystal or cable wear.
Cuff / pneumatic system leak
MediumSymptoms: Inaccurate or failed pressure readings.
Root cause: Cracked cuff bladder or tubing/connector leak.
PVR waveform sensor drift
MediumSymptoms: Distorted or flat plethysmography waveform.
Root cause: Pneumatic transducer calibration drift.
Software / calculation fault
LowSymptoms: Incorrect ABI/TBI calculation, or frozen screen.
Root cause: Application software or workstation fault.
Serviceable Parts & Consumables
The parts a BMET typically services on this class of equipment. Service class and relative cost are general engineering estimates for the category, not figures from this unit's documentation. Part numbers appear only when pulled from this unit's own service manual. Always confirm intervals and pricing against the manufacturer.
Doppler probe
High-turnover; keep spares.
Class Periodic replacementRel. cost $$$R&R Fairly easy
Blood pressure cuff set
Consumable; multiple sizes.
Class Periodic replacementRel. cost $R&R Easy
Pneumatic tubing / connector set
Class Periodic replacementRel. cost $$R&R Fairly easy
Workstation / PC
Class Major service partRel. cost $$$R&R Moderate
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Doppler probe High-turnover; keep spares. | Periodic replacement | $$$ | Fairly easy |
| Blood pressure cuff set Consumable; multiple sizes. | Periodic replacement | $ | Easy |
| Pneumatic tubing / connector set | Periodic replacement | $$ | Fairly easy |
| Workstation / PC | Major service part | $$$ | Moderate |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Troubleshooting Approach
A structured starting point derived from the failure modes above. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Doppler probe / transducer wear
- Confirm the presentation - typically weak, absent, or noisy Doppler signal.
- Check the most likely cause first: probe crystal or cable wear.
- Inspect the affected subsystem against the manufacturer's inspection checklist.
- If the fault is confirmed and not a field adjustment, service or replace the doppler probe per the manufacturer's service documentation.
- Return the device to service only after the manufacturer's functional and applicable electrical-safety checks pass.
- Record the findings, any parts used, and the verification results in the maintenance history.
Symptom: Cuff / pneumatic system leak
- Confirm the presentation - typically inaccurate or failed pressure readings.
- Check the most likely cause first: cracked cuff bladder or tubing/connector leak.
- Inspect the affected subsystem against the manufacturer's inspection checklist.
- If the fault is confirmed and not a field adjustment, service or replace the blood pressure cuff set per the manufacturer's service documentation.
- Return the device to service only after the manufacturer's functional and applicable electrical-safety checks pass.
- Record the findings, any parts used, and the verification results in the maintenance history.
Technical Specs
- Height
- 6.375 in
- Length
- 6.5 in
- Weight
- 11.75 lbs
- Width
- 9.75 in
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →