Thermo Scientific Heraeus Multifuge X3
Thermo Scientific · Model Heraeus Multifuge X3
Increased Capacity and Processing Throughput - Process up to 40 x 50 ml conical tubes (40% more) in a swinging bucket rotor, or up to 14 x 50 ml (100% more) in fixed angle configuration, for significantly increased capacity over competitive models in the same bench space. Broad Range of Rotors - For exceptional versatility, the Heraeus Multifuge X3 supports the broadest range of rotors and adapters available, including Thermo Scientific Fiberlite rotors, for a minimum of 16 rotor configurations. Energy Efficiency - Achieve up to 40% energy consumption savings on industry standard protocols, such as blood separation or conical tubes processing, with the Heraeus Multifuge X3. Space-Savings Design - Realize exceptional capability in compact dimensions for maximized workspace, and with ergonomic height and curved design ensure comfortable loading and unloading of samples and cleaning of the unit. Advanced, Intuitive Programmable Controls - Detailed operation information, including display of set and actual parameters, maximize run performance and temperature accuracy for improved sample protection. Easily adjust speed, time and temperature, even during the run with our convenient keyboard for direct input. Protection for Temperature Sensitive Samples - For high-performance applications with temperature-sensitive samples, the chamber and sample control is available between -10° and +40°C. With our double temperature management system, display the air temperature in the chamber as well as the sample temperature, ensuring accurate control of the sample temperature during the run. Auto-Lock® III Rotor System - A secure locking system allows easy push-button installation and exchange of rotors for quick switch between applications and time savings. Also, easy access to the chamber enables quick cleaning, a healthier working environment and longer unit life. ClickSeal® Bucket Sealing System - THERMO SCIENTIFIC's biocontainment solution, certified by CAMR in Porton Down, UK, allows simple operation eliminating screw caps and complicated clips as well as glove-friendly, one-handed open/close capability. Motorized Lid Latch - Improve closure time and reduce wear with our highly reliable, hybrid lid latch system -combining the advantages of mechanical and electromechnical systems. This patented technology enables one finger downward motion for easiest closing and locking of centrifuge lid- even on tall benches with optional automatic lid opening. SMARTSpin® Technology - The advanced rotor management system maximizes acceleration, braking and residual load imbalance for each rotor and bucket option, optimizing safety and improving separations.
Key tips
- ·Run QC controls before trusting any repair - an analyzer that passes self-test can still report clinically wrong results.
- ·Rule out a reagent lot change before opening the instrument - it can look exactly like a hardware fault.
- ·Centrifuge rotors have a hard retirement age/cycle limit regardless of visible condition - don't eyeball it.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Will not start / error at start
HighSymptoms: Error code, run will not begin, or aborts shortly after start.
Root cause: Set speed exceeds the rotor maximum, an imbalanced load, the lid / door not locked, an unapproved rotor, or a drive / control fault.
Will not reach speed / excessive noise or vibration
MediumSymptoms: Slow spin-up, rumble, or vibration during a run.
Root cause: Load imbalance, worn drive / motor bearings, a worn drive coupling, or (older units) worn motor brushes.
Timer / speed inconsistency
MediumSymptoms: Run ends early / late, or RPM does not match the setting.
Root cause: Tacho / speed-sensor drift or a control-board fault.
Lid / door will not open or lock
MediumSymptoms: Lid-lock error, will not open after a run, or will not lock to start.
Root cause: Lid-lock solenoid / switch fault, or a run still winding down.
Rotor / bucket wear or corrosion
MediumSymptoms: Visible corrosion, cracks, or a bucket that will not swing; imbalance trips.
Root cause: Rotor / bucket ageing - a safety-critical wear item with a use-life limit.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Drive / motor bearings & coupling
Class Major service partRel. cost $$$R&R Difficult
Lid-lock solenoid / switch
Class Major service partRel. cost $$R&R Moderate
Speed sensor / control board
Class Major service partRel. cost $$R&R Moderate
Motor brushes (older units)
Class Periodic replacementRel. cost $R&R Moderate
Rotor / bucket set & O-rings
Log rotor runs; retire per the manufacturer's rotor-life programme.
Class Major service partRel. cost $$$R&R Easy
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Drive / motor bearings & coupling | Major service part | $$$ | Difficult |
| Lid-lock solenoid / switch | Major service part | $$ | Moderate |
| Speed sensor / control board | Major service part | $$ | Moderate |
| Motor brushes (older units) | Periodic replacement | $ | Moderate |
| Rotor / bucket set & O-rings Log rotor runs; retire per the manufacturer's rotor-life programme. | Major service part | $$$ | Easy |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Daily QC controls run and reviewed
- ·Calibration verification per assay
- ·Routine cleaning and decontamination
- ·Scheduled reagent-path and pump-tubing maintenance
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Will not start or errors at start
- Confirm the set speed does not exceed the fitted rotor's maximum and the rotor is approved and seated.
- Rebalance the load - opposing positions evenly loaded and paired.
- Confirm the lid / door latches and the lock engages.
- Look the fault code up in the manual and follow the remedy.
- Functional-check speed and timer after any repair.
Symptom: Noisy / vibrates / will not reach speed
- Rebalance and re-run empty to confirm.
- Spin the rotor by hand and feel for bearing roughness.
- Inspect the drive coupling and (older units) the motor brushes.
- Replace the worn component.
- Verify speed with a tachometer and confirm smooth running.
Technical Specs
- Maximum Speed
- 6000 rpm (w/ BIOShield 1000A rotor)
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Central / core laboratory
- Point-of-care testing stations
- Blood bank
- Microbiology lab
Documents & Manuals
Related calculators
From BioLab, for work done with this kind of equipment.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio