imagiQ
Stille AB · Model Side rail
Side rail EU model (27,5 in 70cm) Accessory for imagiQ operating table
Intended use: A device in the form of a narrow bar designed to be fixed on the wall for mounting and organizing medical devices [e.g., in hospital wards, treatment rooms, intensive care units (ICU)]; the equipment to be supported is not included. It may be used in conjunction with clamps and/or poles. It is available in various lengths.
Key tips
- ·Never defeat or bypass a return-electrode monitoring (REM) alarm to finish a case - it's a direct burn risk.
- ·Verify OR table battery backup - a table that loses power mid-procedure is a real, documented incident type.
- ·Track surgical light lamp-hours rather than waiting for failure - a sudden failure mid-case is avoidable.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Pre-case functional check
- ·Electrosurgical return-electrode cable inspection
- ·Table hydraulic / mechanical inspection
- ·Annual electrical safety test and full PM
Technical Specs
- MRI safety
- Labeling does not contain MRI Safety Information
- Sterile
- No
- Single use
- No
- FDA distribution status
- In Commercial Distribution
- Device type (GMDN)
- Medical device rail
- FDA product classification
- Table, Operating-Room, Electrical
- Manufacturer support
- +46858858000 · qa@stille.se
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Operating rooms
- Procedure rooms
- Interventional suites
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →