Spacelabs 90426 NIBP Adult/Neonatal Module

Technical Specs

Weight

3 lbs

Documents & Manuals

No documents available for this device yet.

Safety & Recalls

Synced live from the FDA openFDA API.

• RECALL

  The firm received reports of loss of audio alarm after a power failure or cable disconnection. The loss of audio for a telemetry patient could delay the recognition of an alarm condition.

• RECALL

  Spacelabs has received multiple complaints reporting telemetry beds dropping off the Spacelabs Central Station resulting in a loss of monitoring.

• RECALL

  The firm received reports of telemetry SpO2 numerics dropping off the Xhibit Central display. Desaturation, high, and low limit alarms work normally.

• RECALL

  The AriaTele Model 96281 with SpO2 monitoring Option C is recalled because the AriaTele (transmitter) display and the Telemetry Central Station display may show a SpO2 value when the sensor is not connected to the patient or in certain sensor failed conditions.

• RECALL

  NIBP pump inside the Ultraview SL Command Module, Model 91496, became loose. The pump is suspended by the air hoses and electrical connections, but there can be enough movement to damage internal components and cause the module to fail.

• RECALL

  Capnography Module, Model 91517, resets 20 seconds after power failure, instead of after three minutes as specified. This reset clears the RAM and the module returns to default settings.

• RECALL

  The monitor has a 3 second delay in the waveforms and respiration alarm; the delay is not disclosed in the IFU.

• RECALL

  There have been reports that the Spacelabs Medical Vital Signs Monitor, Model 91220, will not power up with AC power and will no longer charge the batteries.