
SonoSite · Model S-Series
S-Cath – Custom-designed for radiologists, the S-Cath ultrsaound system requires very little space and provides sharp image quality using just two controls. S-FAST – Designed for emergency physicians, the S-FAST ultrasound system offers amazingly clear image quality and a fast, easy way to transport patient data. S-ICU – The immediacy of the ICU requires an ultrasound system that moves as quickly and efficiently as you do. The S-ICU ultrasound system helps clincians see more, and see better. Faster. S-MSK – Custom designed for clinicians working with musculoskeletal pathology, the S-MSK ultrasound system is surprisingly easy to learn and use, allowing you the opportunity improve care and decrease complications in interventional procedures, such as injections and aspirations. S-Nerve – Anesthesiologists want fewer buttons, menus, and dials. You can operate the S-Nerve ultrasound system using just two controls and one pair of hands, and its strikingly clear image quality lets you see structures as structures and edges as edges. S-Women’s Health – Designed specifically for breast surgeons and women’s health clinicians, the S-Women’s Health ultrasound system features only two controls while also achieving optimum image quality.
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Symptoms: Noisy, low-contrast or non-uniform image, missing sector, drop-out that follows the system not the probe.
Root cause: Front-end / beamformer board fault, a probe-port (connector) board fault, or a system-board fault.
Symptoms: A probe works on one port but not another, or is not detected at all.
Root cause: Worn probe-port connector or a scan-connector board fault.
Symptoms: Dead system, hangs at boot, or powers off under load.
Root cause: Power supply / DC converter, the system battery, or a system-board fault.
Symptoms: Unresponsive TGC sliders or keys, distorted or blank display.
Root cause: Control-panel board, touchscreen, or the monitor.
Symptoms: Thermal-shutdown warning, fan roar, hot exhaust.
Root cause: Failed or dust-clogged cooling fan or blocked air path.
Symptoms: Studies will not send to PACS, images will not archive, worklist empty.
Root cause: Network configuration or a storage-drive fault.
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Front-end / beamformer board | Major service part | $$$$ | Difficult |
| Probe-port / scan-connector board | Major service part | $$$ | Difficult |
| Power supply / DC converter | Major service part | $$$ | Difficult |
| Control-panel / touchscreen assembly | Major service part | $$$ | Moderate |
| Cooling fan | Major service part | $ | Moderate |
| System hard drive | Major service part | $$ | Moderate |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
No documents available for this device yet.
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio