Epredia
RICHARD-ALLAN SCIENTIFIC COMPANY · Model Resolve® Immersion Oil High Viscosity
Resolve™ Immersion Oil is a clear, colorless oil that allows light transmission throughout most of the UV-VIS spectrum. Resolve Immersion Oil is manufactured using a proprietary process that removes most interfering substances, allowing for superb visualization of microscopic samples under high (oil immersion) magnification. Resolve is available in both low viscosity and high viscosity, is non-drying and non-hardening, and has a refractive index of 1.515. It contains no PCBs, eliminating toxicity and disposal problems. Consult your microscope instruction manual for compatibility. Trak 300™ oil
Intended use: An inert oil (e.g., silicone oil, mineral oil, immersion oil) intended to be used as a barrier/seal/partitioning agent to minimize or prevent sample carryover and/or evaporation in an in vitro diagnostic assay performed on a clinical specimen (e.g., using a microwell plate), and/or to occupy the space between a microscope slide and a microscope objective lens to remove air and enhance image resolution of the microscope.
Key tips
- ·Run QC controls before trusting any repair - an analyzer that passes self-test can still report clinically wrong results.
- ·Rule out a reagent lot change before opening the instrument - it can look exactly like a hardware fault.
- ·Centrifuge rotors have a hard retirement age/cycle limit regardless of visible condition - don't eyeball it.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Daily QC controls run and reviewed
- ·Calibration verification per assay
- ·Routine cleaning and decontamination
- ·Scheduled reagent-path and pump-tubing maintenance
Technical Specs
- MRI safety
- Labeling does not contain MRI Safety Information
- Sterile
- No
- Single use
- Yes
- FDA distribution status
- In Commercial Distribution
- Device type (GMDN)
- Molecular grade procedure oil IVD
- FDA product classification
- General Purpose Reagent
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Central / core laboratory
- Point-of-care testing stations
- Blood bank
- Microbiology lab
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →