PHCBi MDF-U333
PHCBi · Model MDF-U333
Front-mounted display/control panel (with new microprocessor) located at convenient waist height Memory backup Temperature display Front access calibration for 7-day temperature recorder The control panel, alarm system and non-volatile memory are the same for all three models in the series Single electrical box makes servicing simpler. The chamber temperature is displayed for five seconds if buzzer key is depressed during power failure alarm After a power outage, operation resumes at pre-outage settings (non-volatile memory for temperature and alarm temperature settings) Control panel can be reset to zero for validation Two access ports (right-hand side and bottom left) Four casters and two adjustable feet.
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Technical Specs
- Height
- 63.8 in
- Length
- 28.9 in
- Width
- 24.2 in
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio