Olympus CLV-180
Olympus · Model CLV-180
Equipped with specially coated filters for NBI. Automatically switches off when the unit has not been used for an extended period of time. Automatically adjusts light intensity to achieve ideal illumination for observation of the gastrointestinal tract. Powerful 300 watt xenon lamp. Backlit front panel indicators and controls improve operability.
Key tips
- ·A failed leak test means the scope does not get reprocessed or used - send it for repair, full stop.
- ·A shortened reprocessing cycle is a real infection-control failure, not a minor deviation - follow AAMI ST91 exactly.
- ·Track light-source lamp-hours against the manufacturer's limit rather than running to failure.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
No or dim endoscopic light
HighSymptoms: Dark or dim endoscopic image, no light at the light-guide connector, sudden loss during a procedure.
Root cause: Xenon lamp module at end of life, a lamp-ignition fault, or a lamp-changeover / power-supply fault.
Cooling fan / thermal shutdown
HighSymptoms: Unit shuts down after a period, over-temperature warning.
Root cause: Failed or obstructed cooling fan, or a blocked air intake.
Light-guide coupling / turret fault
MediumSymptoms: Weak light from one scope, or light only with the connector pushed in hard.
Root cause: Worn light-guide adapter / turret, or a damaged endoscope light guide.
Auto / manual brightness control fault
MediumSymptoms: Brightness will not adjust, or auto-brightness does not track the video processor.
Root cause: Mechanical iris / diaphragm or the brightness control / processor link.
Air-pump fault (integrated insufflation)
MediumSymptoms: No or weak air / CO2 insufflation to the scope.
Root cause: Worn integrated air pump or a valve / tubing fault.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Xenon lamp module
Track lamp hours; let it cool before changing.
Class Frequent wear itemRel. cost $$$R&R Fairly easy
Cooling fan
Class Periodic replacementRel. cost $$R&R Moderate
Light-guide adapter / turret
Class Major service partRel. cost $$R&R Moderate
Iris / brightness control assembly
Class Major service partRel. cost $$R&R Moderate
Integrated air pump
Class Major service partRel. cost $$R&R Moderate
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Xenon lamp module Track lamp hours; let it cool before changing. | Frequent wear item | $$$ | Fairly easy |
| Cooling fan | Periodic replacement | $$ | Moderate |
| Light-guide adapter / turret | Major service part | $$ | Moderate |
| Iris / brightness control assembly | Major service part | $$ | Moderate |
| Integrated air pump | Major service part | $$ | Moderate |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Leak testing before each reprocessing cycle
- ·Scope reprocessing per AAMI ST91
- ·Light source lamp-hour tracking
- ·Annual full PM
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: No or dim light
- Check the lamp-hours counter and replace the lamp module if near end of life (let it cool first).
- Confirm the lamp ignites on power-up.
- Try a known-good endoscope / light guide.
- Check the mains fuse (unplug first).
- Verify full, even output at the light-guide connector.
Symptom: Thermal shutdown
- Confirm the fan runs and the intake / exhaust are unobstructed.
- Clean the vents.
- Replace the fan if noisy or stopped.
- Let the unit cool and restart.
- Monitor for recurrence during a long procedure.
Technical Specs
- Height
- 162 mm
- Length
- 536 mm
- Weight
- 15.4 kg
- Width
- 381 mm
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Endoscopy suite / GI lab
- Operating Room
- Bronchoscopy suite
Documents & Manuals
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio