NeoMedLight CareMin650
NeoMedLight · Model CareMin650
Comfortable & painless Painless fast treatment sessions of about 10 - 15 minutes in total. Safe, simple & accurate A unique reduced device size and a simple and harmless delivery process easily controlled through its user friendly touch screen. Cost Effective Prevent high curative costs with rapid and easy to deliver procedure. Prevention & treatment in one It can be used for the prevention and treatment of both mucositis and dermatitis. 650nm as international guidelines / 1-9 J/cm².
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
Low or no irradiance
HighSymptoms: Blue-light output weak or absent, irradiance below the therapeutic level on a radiometer, lamp-hours alarm.
Root cause: LED array / fluorescent tubes / halogen bulb at end of life, a driver / ballast fault, or a fibre-optic pad fault (blanket).
Uneven light field
MediumSymptoms: One section dim, patchy coverage.
Root cause: A failed LED segment or tube, or a damaged fibre-optic pad.
Fan / thermal fault
MediumSymptoms: Overheating, thermal shutdown, loud fan.
Root cause: Failed or blocked cooling fan.
Timer / hour-meter / control fault
LowSymptoms: Treatment timer or lamp-hour meter wrong, controls unresponsive.
Root cause: Control-board fault.
Irradiance meter out of calibration (if a paired meter)
LowSymptoms: Meter disagrees with a reference radiometer.
Root cause: Meter drift - needs calibration.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
LED array / fluorescent tubes / bulb
Class Frequent wear itemRel. cost $$R&R Fairly easy
Driver / ballast
Class Periodic replacementRel. cost $$R&R Moderate
Fibre-optic pad (blanket units)
Class Frequent wear itemRel. cost $$$R&R Fairly easy
Cooling fan
Class Periodic replacementRel. cost $R&R Fairly easy
Control board
Class Major service partRel. cost $$R&R Moderate
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| LED array / fluorescent tubes / bulb | Frequent wear item | $$ | Fairly easy |
| Driver / ballast | Periodic replacement | $$ | Moderate |
| Fibre-optic pad (blanket units) | Frequent wear item | $$$ | Fairly easy |
| Cooling fan | Periodic replacement | $ | Fairly easy |
| Control board | Major service part | $$ | Moderate |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: Low or no irradiance
- Measure irradiance with a matched radiometer at the manufacturer's specified distance.
- Check the lamp-hours counter and replace the light source if near / past its rating.
- Inspect for failed LED segments or tubes.
- For a blanket, inspect the fibre-optic pad for damage.
- Replace the light source or driver and re-measure irradiance.
Symptom: Uneven or patchy light
- Identify the dim section.
- Replace the failed LED segment / tube.
- For a blanket, replace the fibre-optic pad.
- Confirm even irradiance across the field with the radiometer.
- Log the new lamp-hours baseline.
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio