Innomed Multi-Adjustment Hip Positioner
Innomed · Model Multi-Adjustment Hip Positioner
Provides stable positioning of a patient during hip surgery Multi-adjustment arms allow the positioner to be adjusted to fit all sizes of patients. Especially helpful with large patients where reaching the a.s.i.s. is needed for stabilization.
Key tips
- ·A positioner that has lost padding thickness or developed a tear no longer redistributes pressure as designed - replace it rather than keep using it.
- ·There is no electronic self-test here: condition is assessed by hands-on inspection every PM, not by an alarm.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Visual inspection for tears, cracks, delamination, compression set, and fluid ingress
- ·Check straps, buckles, hook-and-loop, and any mounting hardware for wear and secure attachment
- ·Confirm the surface cleans and disinfects per the manufacturer's instructions for use
- ·Retire and replace once the padding no longer rebounds, splits, or fails to hold position
Documents & Manuals
Safety & Recalls
Synced live from the FDA openFDA API.
- RECALL
54 MM finisher blade was inadvertently affixed to the shaft of the CupX handle in lieu of the 54 MM starter blade.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →