GE UTC Fire & Security PIV Transition Reader Series
GE UTC Fire & Security · Model PIV Transition Reader Series
• Configuration card (supplied) sets the Transition readers to two-state or four-state supervised F/2F mode, or to Wiegand data output (T-5xxSW versions only) • Simultaneously supports GE and HID Corporation (including Corporate 1000) Proximity, MIFARE CSN (ISO 14443A), MIFARE/DESFire CSN, and Vicinity CSN (ISO 15693)credentials, including HID iCLASS CSN, with optional GSA approved PIV support • Accepts 6-16 VDC power input • Allows easy migration from Proximity to MIFARE and Vicinity • smart card technologies • Offers high-reliability, consistent read-range performance and low power consumption • Installs on both metal and non-metal surfaces • Provides tri-color LEDs and beep indication for status, alarm and tamper conditions • Internal tamper alarm alerts security personnel if the reader is breached
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →