Edwards Lifesciences EV1000
Edwards Lifesciences · Model EV1000
Choice - provides the choice of the parameters you want to view and how you want to view them. Clarity - color-based indicators communicate patient status at a glance, and visual clinical support screens allow for immediate recognition and increased understanding of rapidly changing clinical situations for improved decision making. Clinical Support - presenting the physiologic status of the patient in an entirely new and meaningful way enables you to focus on your patient.
Key tips
- ·When no category-specific guidance fits, default to the manufacturer's own service manual and the general troubleshooting method in the Engineer's Guide.
- ·Run an incoming and annual electrical safety test regardless of how niche the device is.
Typical Failure Modes
Compiled for this model from its own documentation and established engineering knowledge for this equipment class - not from a verified service record. Confirm against the manufacturer's service manual.
No cardiac-output / flow value
HighSymptoms: CO / CI blank or dashed, poor arterial waveform quality flagged.
Root cause: FloTrac / VolumeView sensor not zeroed or connected, a damaged pressure cable, or a poor arterial line.
Pressure cable fault
MediumSymptoms: Pressure trace noisy, absent, or will not zero.
Root cause: Worn or damaged reusable pressure cable / connector.
ScvO2 / oximetry calibration fault (if used)
MediumSymptoms: Venous oximetry will not calibrate, values drift.
Root cause: In-vitro / in-vivo calibration not done, or an optical-module / cable fault.
Touchscreen or power fault
MediumSymptoms: Unresponsive touchscreen, will not run on battery, shuts down.
Root cause: Display fault or an aged internal battery.
Serviceable Parts & Consumables
Serviceable items for this model, compiled from its documentation and engineering knowledge for this equipment class. Service class and relative cost are estimates, not manufacturer figures; no part numbers are given. Confirm intervals and pricing against the manufacturer.
Reusable pressure cable
Class Periodic replacementRel. cost $$R&R Easy
FloTrac / VolumeView sensor
Single-patient disposable.
Class ConsumableRel. cost $R&R Easy
Oximetry cable / optical module
Class Periodic replacementRel. cost $$$R&R Fairly easy
Internal battery
Class Periodic replacementRel. cost $$R&R Fairly easy
Touchscreen assembly
Class Major service partRel. cost $$$R&R Moderate
| Part | Service class | Relative cost | R&R difficulty |
|---|---|---|---|
| Reusable pressure cable | Periodic replacement | $$ | Easy |
| FloTrac / VolumeView sensor Single-patient disposable. | Consumable | $ | Easy |
| Oximetry cable / optical module | Periodic replacement | $$$ | Fairly easy |
| Internal battery | Periodic replacement | $$ | Fairly easy |
| Touchscreen assembly | Major service part | $$$ | Moderate |
Relative cost: $ lowest · $$$$ highest service-part cost for this equipment class. Not a price.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Follow the manufacturer's PM schedule
- ·Perform incoming and annual electrical safety testing per facility biomedical program
Troubleshooting Approach
A starting sequence for this model, compiled from its documentation and engineering knowledge for this equipment class. Follow the manufacturer's service documentation for the actual procedure.
Symptom: No CO / flow value
- Confirm the sensor is connected and has been zeroed to atmosphere.
- Check the arterial line for damping, air or a clot and flush it.
- Assess the waveform-quality indicator.
- Swap in a known-good pressure cable.
- Replace the disposable sensor if the waveform is still poor.
Symptom: Pressure trace noisy or absent
- Reseat the pressure cable at the monitor and the sensor.
- Re-zero the transducer at the phlebostatic axis.
- Inspect the cable and connector for damage.
- Replace the pressure cable.
- Confirm a clean arterial trace.
Technical Specs
- Height
- 271 mm (monitor)
- Length
- 46 mm (monitor)
- Weight
- 2 kg (monitor)
- Width
- 280 mm (monitor)
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Varies by device - check the unit's own manual for facility placement guidance
Documents & Manuals
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio