RIK
Arjohuntleigh AB · Model PPO3001
RIK 300 Fluid Operating Table Pad
Intended use: A foam-filled pad or thin mattress, usually full-body length, which is placed on top of a bed mattress to distribute an occupant's body weight over a large surface area, typically to relieve pressure points for comfort and to prevent pressure sores. It is commonly used for elderly immobilized (especially in cases of decubitus ulcers), patients with disabilities, or patients with low body fat. This is a reusable device.
Key tips
- ·Never defeat or bypass a return-electrode monitoring (REM) alarm to finish a case - it's a direct burn risk.
- ·Verify OR table battery backup - a table that loses power mid-procedure is a real, documented incident type.
- ·Track surgical light lamp-hours rather than waiting for failure - a sudden failure mid-case is avoidable.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Pre-case functional check
- ·Electrosurgical return-electrode cable inspection
- ·Table hydraulic / mechanical inspection
- ·Annual electrical safety test and full PM
Technical Specs
- MRI safety
- Labeling does not contain MRI Safety Information
- Sterile
- No
- Single use
- No
- Prescription use
- OTC
- FDA distribution status
- In Commercial Distribution
- Device type (GMDN)
- Foam-filled bed mattress overlay
- FDA product classification
- Mattress, Flotation Therapy, Non-Powered
- Manufacturer support
- +1(800) 323-1245 · us.info@arjo.com
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Operating rooms
- Procedure rooms
- Interventional suites
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →