Bucket
Andreas Hettich GmbH · Model 4522-6
Centrifuge Bucket / Tube Holder (set of 6 matched units) A device intended to compensate for and enable the use of different size test tubes and bottles in a centrifuge rotor bucket or centrifuge tube holder. This is a reusable device.
Intended use: A device intended to compensate for and enable the use of different size test tubes and bottles in a centrifuge rotor bucket or centrifuge tube holder. This is a reusable device.
Key tips
- ·Run QC controls before trusting any repair - an analyzer that passes self-test can still report clinically wrong results.
- ·Rule out a reagent lot change before opening the instrument - it can look exactly like a hardware fault.
- ·Centrifuge rotors have a hard retirement age/cycle limit regardless of visible condition - don't eyeball it.
PM Checklist
Preventive-maintenance tasks typical of this equipment class. Perform to the manufacturer's procedure and your facility's policy - this is general reference, not a schedule for this specific unit.
- ·Daily QC controls run and reviewed
- ·Calibration verification per assay
- ·Routine cleaning and decontamination
- ·Scheduled reagent-path and pump-tubing maintenance
Technical Specs
- MRI safety
- Labeling does not contain MRI Safety Information
- Sterile
- No
- Single use
- No
- Prescription use
- OTC
- FDA distribution status
- In Commercial Distribution
- Device type (GMDN)
- Centrifuge bucket/tube holder adaptor
- FDA product classification
- Centrifuge, Blood-Bank For In Vitro Diagnostic Use
Typical Location
Where this class of equipment is typically deployed - general reference, not this unit's own placement record.
- Central / core laboratory
- Point-of-care testing stations
- Blood bank
- Microbiology lab
Documents & Manuals
No documents available for this device yet.
Troubleshoot this device with Bio
Describe a symptom or error code. Bio answers from this device's own documented error codes, failure modes, parts, and guides.
Ask Bio →